Cut to Size Limestone

Cut to Size Limestone for Custom Architectural Projects

DMR Limestone manufactures cut to size limestone for villas, hotels, resorts, commercial buildings, landscape projects, restoration works and large-scale architectural developments worldwide.

Produced from carefully selected Turkish limestone, our custom stone elements can be manufactured according to architectural drawings, cutting lists, shop drawings, dimensions, profiles and surface finish requirements.

Cut-to-size limestone production allows architects, contractors, developers, importers and stone distributors to order finished or semi-finished natural stone components prepared specifically for each project.

Our custom limestone fabrication services may include:

Limestone floor panels
Wall cladding panels
Façade panels
Stair treads and risers
Pool coping
Window sills
Door and window frames
Wall caps
Pier caps
Fireplace surrounds
Columns
Capitals
Balustrade components
Custom slabs
Curved pieces
Architectural mouldings
Carved stone elements
Numbered installation components

DMR Limestone combines natural stone selection, CNC processing, precision cutting, surface finishing, hand craftsmanship, quality control and export-oriented packaging.

What Is Cut to Size Limestone?

Cut to size limestone refers to natural limestone that is manufactured according to specific project dimensions rather than supplied only in standard tile or slab sizes.

The stone may be cut and processed according to:

Architectural drawings
Shop drawings
Panel schedules
Cutting lists
Elevation plans
Stair schedules
Window schedules
Pool plans
Landscape drawings
3D models
Physical templates
Existing samples

Cut-to-size production may result in ready-to-install components or semi-finished pieces that require additional fabrication at the destination.

The exact production scope depends on the project requirements.

Why Choose Cut to Size Limestone?

Custom fabrication allows natural limestone to be integrated accurately into complex architectural designs.

The main advantages include:

Production according to exact project dimensions
Reduced cutting requirements at the construction site
Greater dimensional consistency
Custom surface finish options
Custom edge profiles
Curved and angled production
Numbered installation pieces
Coordination between multiple product groups
Efficient production for repeated components
Compatibility with architectural drawings
Reduced material waste at the project site
Easier installation planning
Custom packaging by elevation, room or installation zone
Suitable for residential and large commercial projects

Cut-to-size limestone can be manufactured as part of a complete architectural stone package rather than ordered as separate unrelated products.

Turkish Cut to Size Limestone

Turkey is internationally recognised for its natural stone reserves, quarrying experience and stone-processing industry.

Turkish limestone is suitable for custom fabrication because of its:

Natural white, cream and beige colours
Architectural workability
Suitability for CNC machining
Compatibility with carving
Ability to receive multiple finishes
Availability in slabs and blocks
Suitability for indoor and outdoor applications
Compatibility with traditional and contemporary architecture

DMR Limestone supplies Turkish cut to size limestone for international architectural projects.

Production can be organised according to:

Project drawings
Required dimensions
Thickness schedules
Surface finish schedules
Edge profiles
Piece numbers
Installation zones
Packaging instructions
Shipping requirements

Learn more about our materials on the Turkish limestone page.

White Cut to Size Limestone

White limestone is frequently selected for modern villas, luxury hotels, façade projects and coastal developments.

It can be custom fabricated into:

Façade panels
Wall cladding
Large-format flooring
Pool coping
Stair treads
Window sills
Door surrounds
Fireplace surrounds
Columns
Wall caps
Pier caps
Landscape elements

DMR Limestone supplies selected white limestone materials for custom architectural production.

Natural pores, fossils, shell fragments and tonal differences should be expected as part of the authentic stone character.

Limra Cut to Size Limestone

Limra limestone is a light cream to white natural stone quarried in the Antalya region of Turkey.

Its fine appearance and workability make it suitable for extensive cut-to-size production.

Limra limestone can be manufactured into:

Exterior façade panels
Wall cladding
Interior flooring
Stairs
Window sills
Door and window frames
Pool coping
Wall caps
Pier caps
Columns
Capitals
Fireplace surrounds
Carved architectural details

Limra limestone can be processed with honed, brushed, sandblasted and project-specific surface finishes.

Beige Cut to Size Limestone

Beige limestone provides a warmer architectural appearance.

It is suitable for:

Mediterranean villas
Hotels and resorts
Garden walls
Courtyard paving
Traditional façades
Fireplace surrounds
Stairs
Balustrades
Restoration projects

Explore our beige limestone page for related material options.

Custom Limestone Panels

Custom limestone panels can be produced for:

Interior walls
Exterior walls
Ventilated façades
Hotel lobbies
Commercial entrances
Villa elevations
Fireplace walls
Feature walls
Column covers
Soffits
Lift lobbies
Reception areas

Panel production may include:

Rectangular panels
Square panels
Large-format panels
Narrow vertical strips
Horizontal façade bands
Curved panels
Corner pieces
L-shaped returns
Soffit panels
Numbered façade elements

For related applications, visit:

Limestone wall cladding
Limestone facade panels
Exterior wall cladding

Cut to Size Limestone Flooring

Limestone can be cut into project-specific flooring dimensions for villas, hotels, restaurants, offices and commercial interiors.

Custom flooring production may include:

Large-format floor panels
Modular patterns
Square tiles
Rectangular tiles
Random-length flooring
Border pieces
Thresholds
Landing panels
Curved floor sections
Decorative inlays

Custom flooring allows architects to coordinate the stone layout with:

Room dimensions
Wall positions
Columns
Door openings
Staircases
Expansion joints
Interior design modules

Explore our limestone tiles and interior flooring pages.

Cut to Size Limestone Pavers

Custom exterior pavers can be manufactured for terraces, patios, walkways, gardens, hotels and commercial landscapes.

Production may include:

Large-format pavers
Modular paving
Square pavers
Rectangular pavers
Random-length pieces
Curved paving
Border stones
Stepping stones
Custom landscape elements
Drainage pieces

Explore our limestone pavers page.

Cut to Size Limestone Stairs

Custom limestone stair components can be produced according to stair plans and sections.

Production may include:

Stair treads
Risers
Landings
Bullnose steps
Mitred steps
Solid block steps
Winder steps
Curved steps
Spiral stair treads
Stair skirting
Anti-slip grooves
Side cladding

Visit our limestone stairs page.

Cut to Size Limestone Pool Coping

Pool coping can be manufactured according to pool geometry, dimensions and edge profiles.

Custom production may include:

Bullnose coping
Half-bullnose coping
Straight-edge coping
Drop-face coping
Rebated coping
Curved coping
Radius corners
Infinity-pool edge stones
Overflow-channel pieces
Pool-cover recesses
Drain covers

Explore our limestone pool coping and pool surrounds pages.

Cut to Size Limestone Window Sills

Window sills can be produced according to window schedules and façade sections.

Custom sill fabrication may include:

Exterior sloped sills
Interior window ledges
Drip grooves
Rebates
Side returns
Curved sills
Bay-window sills
Moulded front edges
Notches
Mitred details

Visit our limestone window sills page.

Cut to Size Limestone Door and Window Frames

Limestone can be fabricated into complete architectural surrounds.

Components may include:

Door jambs
Window jambs
Lintels
Window heads
Architraves
Window sills
Door thresholds
Arched heads
Keystones
Pediments
Pilasters
Decorative frames

Explore our limestone door and window frames page.

Cut to Size Limestone Wall Caps

Custom wall caps can be manufactured according to finished wall widths and required drainage details.

Production may include:

Flat wall caps
Single-slope coping
Double-slope coping
Saddleback coping
Bullnose wall caps
Moulded coping
Curved wall caps
Radius corners
End pieces
Drip grooves

Visit our limestone wall caps page.

Cut to Size Limestone Pier Caps

Pier caps can be produced according to finished pillar dimensions and project-specific profiles.

Production may include:

Flat pier caps
Pyramid caps
Hipped caps
Moulded caps
Bullnose caps
Round caps
Rectangular caps
Finial-ready caps
Lighting-ready caps
Drip grooves

Explore our limestone pier caps page.

Cut to Size Limestone Fireplace Surrounds

Fireplace components can be manufactured according to firebox dimensions, elevations and interior design drawings.

Custom production may include:

Mantel shelves
Jambs
Headers
Hearths
Overmantels
Carved friezes
Corbels
Wall panels
Floor-to-ceiling cladding
Custom profiles

Visit our limestone fireplace surrounds page.

Cut to Size Limestone Columns and Capitals

Limestone columns and capitals can be produced according to classical or modern architectural designs.

Production may include:

Round columns
Square columns
Fluted shafts
Smooth shafts
Column bases
Tuscan capitals
Doric capitals
Ionic capitals
Corinthian capitals
Pilasters
Half columns
Column cladding

Explore:

Limestone columns
Limestone capitals

Cut to Size Limestone Balustrades

Custom limestone balustrades can be manufactured for balconies, terraces, stairs and garden architecture.

Components may include:

Turned balusters
Square balusters
Top rails
Bottom rails
Newel posts
Corner posts
Stair rails
Curved rails
Post caps
Custom transition pieces

Visit our limestone balustrades page.

Custom Limestone Slabs

Full limestone slabs can be supplied or processed into project-specific panels.

Custom slab production may include:

Large wall panels
Floor panels
Vanity tops
Countertops
Fireplace walls
Stair landings
Reception counters
Custom furniture surfaces
Decorative shelving
Book-matched layouts

Explore our limestone slabs page.

Limestone CNC Cutting

Computer-controlled stone-processing machinery allows limestone components to be produced with accurate and repeatable dimensions.

CNC limestone cutting can be used for:

Straight cutting
Curved cutting
Radius production
Edge profiling
Drip grooves
Anti-slip grooves
Rebates
Notches
Fixing holes
Anchor slots
Mouldings
Relief carving
Column production
Capital production
Custom architectural profiles

CNC production is especially valuable for projects requiring many matching components.

Waterjet Cutting for Limestone

Depending on the project and production requirements, waterjet cutting may be used for:

Complex floor shapes
Decorative patterns
Logos
Inlays
Curved components
Thin detailed cuts
Custom interior designs

The suitability of waterjet cutting depends on:

Stone thickness
Limestone structure
Required detail
Edge finish
Component size
Production quantity

Limestone Bridge-Saw Cutting

Bridge saws are commonly used for accurate straight and angled cutting.

They can be used for:

Floor panels
Wall panels
Pavers
Stair treads
Risers
Window sills
Wall caps
Pier caps
Pool coping
Slab fabrication

Bridge-saw cutting supports efficient production of rectangular and angled components.

Limestone Profiling

Limestone edges and surfaces can be machined into custom profiles.

Available profiles may include:

Straight edges
Pencil edges
Bevelled edges
Chamfered edges
Full bullnose
Half bullnose
Ogee profiles
Cavetto mouldings
Torus mouldings
Stepped profiles
Rebated edges
Drop-face details
Classical cornices
Custom architect-designed profiles

Profiles may be produced from CAD drawings, templates or existing stone samples.

Limestone Carving

Limestone can be carved into architectural and decorative forms.

Carved products may include:

Capitals
Fireplace surrounds
Door frames
Window surrounds
Pediments
Keystones
Relief panels
Floral motifs
Acanthus leaves
Logos
Monograms
Family crests
Custom decorative elements

Carving may combine CNC rough shaping with detailed hand finishing.

Hand-Finished Limestone

Some architectural components require hand-finishing after machine production.

Hand-finishing may be used to:

Refine carved details
Sharpen mouldings
Remove machining marks
Create historic textures
Produce chiselled surfaces
Add aged effects
Match restoration components
Complete difficult corners
Improve decorative depth

This combination of technology and craftsmanship is particularly important for classical architecture and restoration work.

Custom Limestone Surface Finishes

DMR Limestone can manufacture cut-to-size elements with different finishes according to the intended application.

Honed Limestone

Honed limestone has a smooth, matte appearance.

It is suitable for:

Interior flooring
Wall panels
Fireplaces
Window sills
Modern stairs
Hotel interiors
Villa interiors

Brushed Limestone

Brushed limestone has a lightly textured surface.

It is suitable for:

Exterior paving
Pool areas
Garden projects
Villa terraces
Wall cladding
Stair treads

Sandblasted Limestone

Sandblasted limestone provides a textured, non-reflective finish.

It is suitable for:

Exterior façades
Pool coping
Exterior stairs
Pavers
Wall caps
Commercial landscapes

Tumbled Limestone

Tumbled limestone has softened edges and an aged appearance.

It is suitable for:

Mediterranean villas
Garden pathways
Traditional courtyards
Rustic interiors
Restoration-style projects

Sawn Limestone

Sawn limestone has a machine-cut surface with visible production texture.

It may be suitable for:

Contemporary façades
Raw architectural surfaces
Landscape elements
Further finishing
Semi-finished export products

Bush-Hammered Limestone

Bush hammering creates a rough, evenly textured surface.

It is suitable for:

Exterior stairs
Public landscapes
Commercial paving
Garden walls
High-grip applications

Chiselled Limestone

Chiselled finishes create directional or handcrafted texture.

They may be used for:

Feature walls
Façades
Fireplace elements
Garden structures
Restoration projects
Decorative stonework

Custom Limestone Thicknesses

Cut-to-size limestone can be produced in different thicknesses depending on the application.

Possible thicknesses may include:

15 mm
20 mm
30 mm
40 mm
50 mm
60 mm
80 mm
100 mm
Greater custom thicknesses

Not every thickness is suitable for every stone or application.

Thickness should be determined according to:

Component dimensions
Structural support
Fixing method
Interior or exterior use
Expected loads
Edge profile
Stone characteristics
Transport requirements
Installation method

Custom Limestone Sizes

Maximum component dimensions depend on:

Quarry block dimensions
Slab dimensions
Stone structure
Requested thickness
Surface finish
Machinery
Transport limitations
Installation access
Structural requirements

Large pieces may need to be divided into several numbered components.

The final piece sizes should balance:

Architectural appearance
Stone performance
Handling
Packaging
Transport
Installation safety

Limestone Cutting Lists

A cutting list identifies every stone piece required for the project.

A detailed cutting list may include:

Piece number
Product type
Length
Width
Thickness
Quantity
Surface finish
Edge finish
Profile
Holes
Notches
Rebates
Installation location
Drawing reference
Crate number

Clear cutting lists reduce production uncertainty and support accurate quotations.

Production from Architectural Drawings

DMR Limestone can manufacture components from approved architectural and technical drawings.

Useful documents may include:

Plans
Elevations
Sections
Shop drawings
Panel schedules
Stair schedules
Window schedules
Pool plans
Landscape plans
Detail drawings
CAD files
3D models
Quantity schedules

Critical dimensions should be confirmed before production begins.

Limestone Shop Drawings

Shop drawings translate architectural intent into production-ready stone details.

They may show:

Individual stone dimensions
Joint positions
Edge profiles
Fixing holes
Anchor slots
Piece numbers
Installation zones
Corner details
Curved geometry
Sections
Assembly relationships

Depending on the project scope, shop drawings may be prepared by the architect, façade contractor, stone contractor or specialist design team.

Piece Numbering

Complex projects require every stone component to be clearly identified.

Piece numbering can be organised according to:

Building
Elevation
Floor
Room
Stair flight
Window number
Pool position
Wall section
Landscape zone
Installation sequence

Numbers may be marked on:

Stone backs
Labels
Crates
Packing lists
Installation drawings

Piece numbering supports faster and more organised installation.

Factory Dry Layout

Selected cut-to-size components can be dry laid or trial assembled in the factory.

Dry layouts may be used for:

Façade panels
Fireplace surrounds
Door frames
Window surrounds
Balustrades
Columns
Capitals
Pool coping
Curved walls
Decorative flooring
Restoration components

Factory review can help verify:

Dimensions
Profiles
Joints
Colour range
Piece numbering
Curved geometry
Overall appearance

Limestone Mock-Ups

Full-size mock-ups are recommended for major or technically complex projects.

Mock-ups may help evaluate:

Material colour
Fossil variation
Surface finish
Joint width
Edge profile
Fixing details
Corner solutions
Water drainage
Cleaning methods
Overall architectural appearance

An approved mock-up may become the production and installation quality reference.

Limestone Quality Control

Quality-control procedures may include:

Block selection
Slab inspection
Colour-range review
Dimension checks
Thickness control
Surface-finish inspection
Edge-profile verification
Hole and slot checks
Curved-radius control
Carving review
Piece-number inspection
Dry-layout review
Packaging inspection

Natural stone variation should be managed according to approved samples and project requirements.

Dimensional Tolerances

Natural stone production requires defined dimensional tolerances.

Tolerance requirements may vary according to:

Product type
Stone thickness
Panel size
Edge profile
Finish
Installation system
Project specification
Machinery
Natural stone characteristics

Tolerances should be agreed before production, especially for:

Mechanically fixed façades
Mitred steps
Pool coping
Window sills
Door frames
Curved components
Restoration pieces

Limestone Reinforcement

Some limestone components may require reinforcement depending on their dimensions and application.

Possible reinforcement methods may include:

Fibreglass mesh
Stainless-steel rods
Epoxy reinforcement
Kerf reinforcement
Backing panels
Structural support frames
Concealed steel elements

Reinforcement requirements should be determined according to the project and structural design.

Limestone Anchor Slots and Fixing Holes

Façade and architectural components may require factory-prepared fixing details.

Production may include:

Kerf slots
Pin holes
Undercut-anchor holes
Dowel holes
Bracket recesses
Threaded insert positions
Lifting holes
Hidden fixing channels

All anchor details should be based on approved engineering drawings and suitable stone thicknesses.

Limestone Rebates and Notches

Rebates and notches may be required to coordinate stone components with:

Window frames
Door frames
Pool structures
Drainage systems
Wall cladding
Steel supports
Lighting
Waterproofing
Mechanical fixings
Adjacent finishes

Accurate detail drawings are required before production.

Curved Cut to Size Limestone

Curved limestone components can be produced for:

Circular walls
Curved façades
Columns
Pool coping
Curved stairs
Round windows
Arched doorways
Garden planters
Balustrades
Reception desks
Decorative interiors

Curved production requires accurate information such as:

Inner radius
Outer radius
Centre point
Arc angle
Segment length
Thickness
Joint locations
Surface finish

Angled Limestone Components

Custom angled pieces may be required for:

Bay windows
Staircases
Facade corners
Pool corners
Garden walls
Door surrounds
Geometric interiors
Custom paving layouts

Angled components may include:

Mitred pieces
Trapezoidal panels
Wedge-shaped steps
Angled wall caps
Custom corner units
Transition pieces

Mitred Limestone Fabrication

Mitred fabrication creates a clean corner or the visual appearance of thicker stone.

It may be used for:

Stair treads
Pool coping
Fireplace surrounds
Wall panels
Window sills
Countertops
Wall caps
Pier caps
Large-format architectural elements

Mitred joints require accurate cutting, bonding and finishing.

Limestone Restoration Fabrication

Cut-to-size production is especially valuable for restoration and heritage projects.

Custom work may include:

Replacing damaged façade pieces
Reproducing historic profiles
Matching window sills
Recreating door surrounds
Producing stair treads
Manufacturing capitals
Reproducing balusters
Copying wall coping
Matching fireplace components
Carving lost details

Reference information may include:

Existing samples
Site measurements
Historic drawings
Photographs
3D scans
Profile templates
Physical moulds
Approved restoration samples

Visit our restoration projects page.

Cut to Size Limestone for Architects

DMR Limestone supports architects with project-based limestone fabrication.

Support may include:

Material selection
Finish samples
Dimensional review
Profile development
Large-format panel planning
Curved component production
Mock-up preparation
Drawing-based manufacturing
Piece numbering
Dry layouts
Packaging planning
Matching architectural products

Architects can provide:

Plans
Elevations
Sections
CAD files
3D models
Panel schedules
Cutting lists
Finish schedules
Quantity schedules

Visit our dedicated architects page.

Cut to Size Limestone for Contractors

Contractors require accurate production, reliable dimensions and clear site identification.

For quotation and production, contractors should provide:

Limestone preference
Component dimensions
Thicknesses
Surface finishes
Edge profiles
Quantities
Drawings
Fixing details
Project destination
Packaging requirements
Delivery schedule

Visit our contractors page.

Cut to Size Limestone for Importers

DMR Limestone supplies project-specific and standard cut-to-size limestone to importers.

Orders may include:

Finished architectural components
Semi-finished pieces
Standard-size products
Mixed product containers
Private-label collections
Samples
Display pieces
Repeated custom components

Importers can combine:

Limestone tiles
Limestone pavers
Limestone slabs
Limestone wall cladding
Architectural cut-to-size products

Visit our importers page.

Cut to Size Limestone for Stone Distributors

Stone distributors can order cut-to-size products for local fabrication, retail collections or project supply.

Possible products include:

Window sills
Wall caps
Pier caps
Pool coping
Stair treads
Fireplace components
Façade panels
Pavers
Tiles
Custom profiles

Visit our stone distributors page.

Cut to Size Limestone for Hotel Developers

Hotel projects often require many coordinated natural stone products across exterior, interior and landscape areas.

Custom limestone packages may include:

Façade panels
Lobby flooring
Pool coping
Pool-deck pavers
Stairs
Window sills
Wall caps
Pier caps
Fireplace surrounds
Landscape elements
Guestroom stone components

Visit our hotel and resort projects page.

Cut to Size Limestone for Villa Builders

Luxury villas frequently require coordinated stone products across the entire project.

A custom villa package may include:

Façade cladding
Entrance frames
Window sills
Columns
Capitals
Balustrades
Stairs
Pool coping
Pavers
Wall caps
Pier caps
Fireplace surrounds

Explore our villa facades and luxury residential projects pages.

Cut to Size Limestone for Landscape Designers

Landscape projects may require:

Pavers
Garden steps
Pool coping
Seating wall caps
Pier caps
Planter coping
Water-feature components
Curved garden walls
Landscape borders
Custom stone benches

Visit our landscape designers and landscape architecture pages.

Export Packaging for Cut to Size Limestone

Custom stone components require packaging designed for their dimensions, profiles and installation sequence.

Packaging may include:

Reinforced wooden crates
Vertical panel frames
A-frame supports
Foam separators
Edge protectors
Carving protection
Profile supports
Moisture protection
Piece labels
Crate lists
Elevation references
Installation-zone identification

Packaging design depends on:

Component size
Weight
Thickness
Surface finish
Fragility
Transport route
Container type
Unloading method

Installation-Sequence Packaging

Large projects may benefit from packaging according to the installation sequence.

Crates can be organised by:

Building
Floor
Elevation
Room
Stair flight
Pool section
Window type
Landscape zone
Construction phase

This can reduce unnecessary handling and improve site organisation.

Mixed Limestone Product Orders

A single project may require several different limestone products.

Mixed orders may include:

Tiles
Pavers
Slabs
Wall cladding
Façade panels
Stairs
Pool coping
Window sills
Wall caps
Pier caps
Columns
Balustrades
Fireplace surrounds

Production and packaging can be coordinated according to project priorities and shipment planning.

How to Request a Cut to Size Limestone Quotation

To prepare an accurate quotation, DMR Limestone generally requires:

Preferred limestone
Product type
Dimensions
Thickness
Surface finish
Edge profiles
Required quantities
Drawings
Cutting lists
Holes and rebates
Curved-piece information
Carving requirements
Delivery destination
Packaging requirements
Project schedule

Incomplete information may require a preliminary rather than final quotation.

How to Select the Right Limestone

Define the Application

Confirm whether the limestone will be used for:

Interior flooring
Exterior paving
Façade panels
Pool coping
Stairs
Wall caps
Fireplace surrounds
Carved architectural details

Review the Colour

Select between white, cream and beige limestone according to the design.

Review Natural Variation

Limestone may contain:

Fossils
Shell fragments
Pores
Veins
Tonal variation
Natural markings
Sedimentary patterns

Choose the Finish

The finish should match the application, slip resistance and design requirements.

Confirm Dimensions and Thickness

Large-format or unsupported elements require careful thickness and structural review.

Finalise Edge and Fixing Details

Profiles, grooves, holes, anchors and rebates should be defined before production.

Approve Samples

Samples should confirm:

Material
Colour range
Surface finish
Edge profile
Carving quality
Natural variation

Why Choose DMR Limestone?

DMR Limestone provides project-specific Turkish limestone production for international architecture.

Our cut-to-size capabilities include:

Precision cutting
Standard and custom dimensions
Multiple thicknesses
Large-format panels
Curved components
CNC processing
Edge profiling
Rebates and notches
Anchor slots and holes
Drip grooves
Anti-slip grooves
Carved architectural elements
Hand-finished stonework
Restoration reproduction
Piece numbering
Factory dry layouts
Quality control
Export-oriented packaging
Mixed product orders

From a single custom window sill to a complete villa, hotel or commercial façade package, DMR Limestone can manufacture limestone according to project-specific architectural requirements.

Frequently Asked Questions About Cut to Size Limestone

What does cut to size limestone mean?

Cut to size limestone is natural stone manufactured according to specific project dimensions, profiles and finishes rather than supplied only in standard tile or slab sizes.

Can you cut limestone according to architectural drawings?

Yes. DMR Limestone can manufacture limestone according to plans, elevations, sections, shop drawings, panel schedules and cutting lists.

Can limestone be cut to any size?

Limestone can be produced in many custom sizes, but maximum dimensions depend on quarry blocks, slab sizes, thickness, stone structure, machinery and transport conditions.

Can you produce custom limestone thicknesses?

Yes. Different thicknesses can be produced depending on the material, component dimensions and application.

Can you produce large-format limestone panels?

Yes. Large-format panels can be manufactured subject to block dimensions, stone characteristics, thickness and engineering requirements.

Can you manufacture curved limestone?

Yes. Curved panels, coping, wall caps, stairs, columns and other components can be produced according to radius drawings or 3D models.

Can you produce angled and mitred limestone pieces?

Yes. Angled panels, mitred steps, drop-face coping, bay-window sills and custom corner pieces can be manufactured.

Can you produce limestone from a sample?

Yes. Existing stone components, profiles and samples can be used as production references when accurate measurements are available.

Can you reproduce historic limestone details?

Yes. Historic elements can be reproduced using samples, drawings, photographs, templates, moulds or 3D scans.

Can limestone be CNC cut?

Yes. CNC machinery can be used for profiling, carving, curved cutting, grooves, holes, rebates, columns and decorative elements.

Can you produce hand-carved limestone?

Yes. Detailed architectural components can be refined or fully carved by skilled stone craftsmen.

Which limestone colours are available?

DMR Limestone supplies natural white, cream and beige Turkish limestone options.

Which finishes are available?

Possible finishes include honed, brushed, sandblasted, tumbled, sawn, bush-hammered, chiselled and custom textures.

Can you produce both interior and exterior limestone components?

Yes. Cut-to-size limestone can be manufactured for interior flooring, walls, fireplaces and stairs as well as façades, paving, pools and landscape projects.

Can you produce limestone stair treads?

Yes. Treads, risers, landings, curved steps, winder steps, nosings and skirting can be manufactured.

Can you produce custom pool coping?

Yes. Bullnose, straight, drop-face, rebated, curved and infinity-pool coping can be produced.

Can you produce custom window sills?

Yes. Sills can include slopes, drip grooves, rebates, returns, curves and custom edge profiles.

Can you produce wall and pier caps?

Yes. Flat, sloped, pyramid, hipped, bullnose, curved and moulded caps can be manufactured.

Can you produce façade panels with anchor slots?

Yes. Kerfs, pin holes, undercut-anchor holes and other fixing preparations can be manufactured according to approved engineering drawings.

Can you produce custom carvings and logos?

Yes. Logos, monograms, crests, relief panels and decorative carvings can be manufactured.

Can every limestone piece be numbered?

Yes. Pieces can be numbered according to building, elevation, floor, room, pool position, staircase or installation sequence.

Can you dry lay limestone before shipment?

Yes. Selected products can be dry laid or trial assembled to confirm dimensions, profiles, colour range and joints.

Can you produce a full-size mock-up?

Yes. Full-size samples or mock-ups can be prepared for larger architectural projects.

What dimensional tolerances are available?

Tolerances depend on the product, thickness, size, finish and project specification. Required tolerances should be agreed before production.

Can limestone pieces be reinforced?

Selected components may be reinforced with mesh, rods, epoxy or backing systems according to project requirements.

Can you package stone according to installation zones?

Yes. Crates can be organised by elevation, floor, room, window, stair flight, pool section or landscape zone.

Can mixed products be shipped in one container?

Yes. Depending on quantities, dimensions, weight and packaging compatibility, different limestone products may be combined in one shipment.

What files should I send for a quotation?

Please send:

Architectural drawings
Cutting lists
Product dimensions
Thicknesses
Surface finishes
Edge profiles
Quantities
Hole and rebate details
Curved-piece drawings
Delivery destination
Packaging requirements

Request Cut to Size Limestone Pricing

Are you planning a villa, hotel, resort, commercial building, façade, pool, landscape or restoration project?

Contact DMR Limestone to request:

Turkish limestone samples
White and Limra limestone options
Custom stone dimensions
Surface finish samples
Large-format panels
CNC-cut components
Curved limestone
Custom profiles
Stair production
Pool coping
Window sills
Wall and pier caps
Fireplace surrounds
Columns and capitals
Restoration reproductions
Piece-numbered production
Export packaging
Project-specific pricing

Send us your architectural drawings, cutting lists, dimensions, surface finishes, required quantities and delivery destination to receive a customised cut-to-size limestone quotation.

7/24 Support

Start Creating Better Websites Today