Custom Cut-to-Size Limestone

DMR Limestone manufactures and supplies custom cut-to-size limestone for residential, hospitality, commercial, landscape and restoration projects worldwide.

Our project-based limestone fabrication services allow architects, contractors, designers, importers and stone specialists to order natural stone components according to specific dimensions, thicknesses, finishes, profiles and installation requirements.

Cut-to-size limestone products may include:

Façade panels
Exterior wall cladding
Interior wall panels
Floor tiles
Large-format flooring
Stair treads and risers
Window sills
Door and window surrounds
Pool coping
Pool-deck pavers
Wall caps
Pier caps
Fireplace surrounds
Columns and capitals
Balustrades
Cornices
Mouldings
Curved components
Landscape elements
Carved architectural features

Production may be based on:

Architectural drawings
Façade elevations
Interior elevations
Landscape plans
Pool drawings
Stair schedules
Door and window schedules
Cutting lists
Shop drawings
Physical templates
Existing stone samples
CAD files
Three-dimensional models
Three-dimensional scans

From simple rectangular panels to complex carved architectural elements, DMR Limestone can manufacture coordinated limestone packages according to project-specific requirements.

What Is Cut-to-Size Limestone?

Cut-to-size limestone is natural stone manufactured to defined project dimensions rather than supplied only in standard tile or slab formats.

The process may include:

Selecting limestone blocks or slabs
Cutting pieces to specified lengths and widths
Calibrating thickness
Applying the required surface finish
Profiling edges
Producing curves and radii
Cutting openings
Preparing anchor slots
Drilling fixing holes
Producing grooves and rebates
Carving decorative details
Numbering individual components
Packaging products according to installation zones

Cut-to-size production is suitable for projects requiring accurate coordination between stone and other building systems.

Why Choose Custom Cut-to-Size Limestone?

Standard stone sizes are not suitable for every architectural design.

Custom production allows the limestone to be coordinated with:

Building grids
Façade modules
Window and door openings
Stair dimensions
Swimming pool geometry
Wall thicknesses
Landscape layouts
Interior room proportions
Mechanical fixing systems
Installation sequences

The main advantages include:

Project-specific dimensions
Reduced on-site cutting
Better control of joint layouts
Custom thickness options
Coordinated surface finishes
Factory-produced edge profiles
Curved and shaped components
Fixing preparation
Piece numbering
Installation-zone packaging
Repeatable production for multi-building projects
Coordination across façades, interiors and landscapes
Export-ready packaging

Factory fabrication can help reduce unnecessary site processing and support a more organised installation process.

Turkish Cut-to-Size Limestone

Turkey is internationally recognised for natural stone quarrying, processing and architectural fabrication.

Turkish limestone is suitable for cut-to-size projects because of its:

Natural white, cream and beige colour range
Availability in blocks and slabs
Compatibility with precision cutting
Suitability for CNC processing
Carving potential
Ability to receive different finishes
Suitability for modern and classical architecture
Availability for project-based production
International export potential

DMR Limestone manufactures Turkish cut-to-size limestone for architects, contractors, developers, importers and stone distributors.

Learn more about our material options on the Turkish limestone page.

White Cut-to-Size Limestone

White limestone creates a bright, refined and contemporary architectural appearance.

It may be manufactured for:

Villa façades
Hotel façades
Commercial entrances
Interior walls
Flooring
Staircases
Window sills
Fireplace surrounds
Pool coping
Landscape architecture
Carved elements

White limestone works well with:

Glass
Timber
Black aluminium
Bronze
Steel
Neutral interiors
Modern landscaping
Blue swimming pools

Explore our white limestone range.

Natural pores, fossils, shell fragments and tonal variation are expected characteristics of authentic limestone.

Limra Cut-to-Size Limestone

Limra limestone is a light cream to white natural stone quarried in the Antalya region of Turkey.

Its refined appearance and architectural workability make it suitable for:

Façade panels
Wall cladding
Floor tiles
Stair treads
Door surrounds
Window sills
Columns
Capitals
Balustrades
Fireplace surrounds
Pool coping
Wall caps
Carved elements

Limra limestone can be manufactured with honed, brushed, sandblasted, chiselled, sawn and project-specific finishes.

Beige Cut-to-Size Limestone

Beige limestone creates a warmer natural stone appearance.

It may be used for:

Mediterranean villas
Traditional hotels
Country houses
Courtyard paving
Garden walls
Fireplace surrounds
Interior flooring
Classical architectural elements
Landscape projects

Explore our beige limestone options.

Cut-to-Size Limestone Façade Panels

Façade panels can be manufactured according to architectural elevations and panel schedules.

Production may include:

Standard rectangular panels
Large-format panels
Narrow façade strips
Horizontal courses
Vertical panels
Corner pieces
Curved panels
Rusticated panels
Entrance portal components
Building-base panels
Soffit pieces
Parapet components

Visit our limestone facade panels page.

Exterior Wall Cladding

Cut-to-size limestone may be produced for:

Complete building façades
Partial exterior cladding
Ground-floor podiums
Entrance walls
Courtyards
Landscape structures
Chimneys
Feature elevations
Garden buildings

Explore:

Exterior wall cladding
Limestone wall cladding

Mechanically Fixed Limestone Panels

Panels for mechanical façade systems may include factory-prepared:

Anchor slots
Kerfs
Dowel holes
Undercut-anchor holes
Bracket recesses
Support notches
Lifting holes
Custom fixing details

All fixing locations should follow approved façade-engineering and shop drawings.

DMR Limestone manufactures the stone components but does not replace the role of the project’s façade engineer.

Adhesive-Fixed Limestone Cladding

Smaller limestone panels and tiles may be prepared for adhesive or mortar-based installation.

Suitability depends on:

Panel size
Panel weight
Stone thickness
Substrate
Building height
Interior or exterior use
Climate
Adhesive system
Local regulations

Large, heavy or overhead stone should not automatically be designed for adhesive-only fixing.

Large-Format Limestone Panels

Large-format limestone can create fewer joints and a clean architectural appearance.

Applications include:

Modern façades
Hotel lobbies
Interior feature walls
Luxury residential floors
Reception areas
Commercial entrances
Fireplace walls

Large-format production should consider:

Available block and slab dimensions
Natural stone structure
Panel thickness
Weight
Handling
Transport
Site access
Fixing system
Installation equipment

Maximum dimensions vary according to the selected limestone and project requirements.

Custom Limestone Floor Tiles

Floor tiles can be produced in standard or project-specific dimensions.

Possible formats include:

Square tiles
Rectangular tiles
Large-format tiles
Narrow planks
Modular sets
Random-length pieces
French-pattern sets
Border strips
Custom geometric pieces

Visit our limestone tiles page.

Large-Format Limestone Flooring

Custom large-format floor panels may be manufactured for:

Luxury residences
Hotel lobbies
Commercial reception areas
Restaurants
Galleries
Offices
Covered courtyards

Large floor panels require careful coordination of:

Subfloor flatness
Panel weight
Joint layout
Movement joints
Handling access
Installation method
Lippage control

Explore our interior limestone flooring page.

Cut-to-Size Limestone Slabs

Limestone slabs may be supplied for further fabrication or processed into finished components.

Applications include:

Large floor panels
Interior wall panels
Fireplace components
Stair landings
Reception desks
Custom furniture elements
Vanity components
Architectural panels

Visit our limestone slabs page.

Custom Limestone Wall Panels

Interior wall panels may be manufactured according to room elevations and panel layouts.

Possible products include:

Full-height panels
Horizontal panels
Vertical panels
Feature-wall panels
Fireplace wall pieces
Television-wall panels
Lift-lobby panels
Curved wall panels
Column cladding
Decorative panels

Explore our interior wall cladding page.

Fireplace Wall Panels

Custom fabrication may include:

Fireplace jambs
Headers
Mantel shelves
Hearths
Overmantels
Full-height wall panels
Television recesses
Mitred returns
Ventilation openings
Integrated shelves

Visit our limestone fireplace surrounds page.

Firebox clearances, heat exposure and fire regulations should be confirmed by qualified project professionals.

Custom Limestone Stair Treads

DMR Limestone manufactures stair components according to staircase drawings and schedules.

Products may include:

Straight treads
Risers
Landings
Bullnose treads
Mitred steps
Solid block steps
Curved steps
Winder steps
Stair skirting
Side cladding
Anti-slip grooves

Visit our limestone stairs page.

Bullnose Stair Treads

Bullnose profiles may include:

Full bullnose
Half bullnose
Soft bullnose
Pencil round
Custom rounded nosing

The profile should be selected according to interior design, traffic and safety requirements.

Mitred Limestone Steps

Mitred steps can create the visual appearance of thick solid stone while using separate tread and riser components.

Production may include:

Factory-cut mitres
Bonded drop faces
Reinforced edges
Corner returns
Numbered step sets

The supporting staircase and installation method should be professionally designed.

Solid Limestone Steps

Solid steps can be produced for:

Building entrances
Gardens
Hotel landscapes
Monumental staircases
Pool areas

Solid units are heavy and require suitable foundations, lifting equipment and installation planning.

Curved and Winder Steps

Curved staircase components require accurate:

Inner radius
Outer radius
Tread depth
Riser height
Stair angle
Nosing profile
Joint positions
Central reference point

Each piece can be numbered according to the staircase plan.

Custom Limestone Window Sills

Window sills can be produced according to window schedules and façade details.

Options may include:

Exterior sills
Interior sills
Sloped sills
Flat sills
Drip grooves
Front overhangs
Horns
Side returns
Rebates
Notches
Moulded front edges
Curved sills

Visit our limestone window sills page.

Window-Sill Drip Grooves

Drip grooves can help control water beneath projecting sills.

The design should define:

Groove location
Groove width
Groove depth
Sill overhang
End position
Continuity around corners

Window sills should coordinate with flashings, membranes and the complete wall-water-management system.

Limestone Door and Window Frames

Custom frames may include:

Door jambs
Window jambs
Lintels
Architraves
Thresholds
Keystones
Pediments
Arched heads
Deep reveals
Corner blocks

Explore our limestone door and window frames page.

Modern Entrance Portals

Modern portals may use:

Large rectangular components
Deep limestone reveals
Minimal joints
Mitred corners
Integrated lighting recesses
House-number panels
Custom soffit pieces

Classical Entrance Surrounds

Classical entrance packages may include:

Columns
Pilasters
Capitals
Cornices
Pediments
Keystones
Carved friezes
Moulded architraves

Complex entrance systems may be trial assembled before shipment.

Custom Limestone Arches

Arches may be produced for:

Doors
Windows
Courtyards
Interior openings
Garden gates
Fireplace openings

Components may include:

Voussoirs
Keystones
Springing blocks
Curved architraves
Recessed reveals

Each component can be numbered according to its installation location.

Custom Limestone Pool Coping

Pool coping can be manufactured according to pool plans and profile details.

Options include:

Bullnose coping
Half-bullnose coping
Straight-edge coping
Drop-face coping
Rebated coping
Curved coping
Radius corners
Infinity-pool edges
Overflow-channel pieces
Custom end pieces

Visit our limestone pool coping page.

Curved Pool Coping

Curved coping production requires:

Inner radius
Outer radius
Coping width
Thickness
Arc angle
Segment length
Edge profile
Drop-face depth
Joint width

Pieces can be numbered to match the pool plan.

Drop-Face Pool Coping

Drop-face coping may be produced as:

Solid thick units
Mitred L-shaped units
Bonded two-piece elements
Curved drop-face segments
Custom corner pieces

Explore our pool surrounds page.

Infinity-Pool Stone Components

Custom stone may be manufactured for:

Overflow edges
Catch basins
Slot drains
Channel covers
Level-deck transitions
Removable access panels
Curved overflow sections

Production should follow approved pool-engineering and waterproofing drawings.

Custom Limestone Pavers

Pavers may be manufactured for:

Terraces
Courtyards
Pool decks
Garden paths
Entrance plazas
Hotel landscapes
Commercial outdoor spaces
Driveway borders

Possible formats include:

Square pavers
Rectangular pavers
Large-format pavers
Random lengths
Modular patterns
Stepping stones
Curved pieces
Border stones

Visit our limestone pavers page.

Custom Garden Pathway Stone

Landscape pathway components may include:

Large stepping stones
Circular stepping stones
Radius-cut paving
Tapered pieces
Garden edging
Border strips
Drain covers
Garden steps
Lighting recesses

Explore our garden pathways and landscape architecture pages.

Custom Limestone Wall Caps

Wall caps may be manufactured according to wall width, slope and profile requirements.

Options include:

Flat caps
Single-slope caps
Double-slope caps
Saddleback coping
Bullnose caps
Moulded coping
Curved wall caps
Seating wall caps
Corner pieces
End pieces

Visit our limestone wall caps page.

Custom Limestone Pier Caps

Pier caps may be produced as:

Flat caps
Pyramid caps
Hipped caps
Moulded caps
Round caps
Finial-ready caps
Lighting-ready caps
Carved caps

Visit our limestone pier caps page.

Limestone Columns and Column Cladding

Custom column products may include:

Round columns
Square columns
Fluted columns
Smooth columns
Column drums
Half columns
Pilasters
Curved column cladding
Column bases
Custom shaft sections

Explore our limestone columns page.

Limestone Capitals

Capitals may be manufactured according to classical or custom designs.

Options include:

Tuscan capitals
Doric capitals
Ionic capitals
Corinthian capitals
Composite capitals
Modern capitals
Floral capitals
Custom scanned reproductions

Visit our limestone capitals page.

Limestone Balustrade Components

Balustrade products may include:

Turned balusters
Square balusters
Top rails
Bottom rails
Newel posts
Corner posts
Stair rails
Curved rails
Post caps

Explore our limestone balustrades page.

The complete balustrade system must be professionally designed to meet applicable structural and safety requirements.

Custom Limestone Fireplace Surrounds

Fireplace components can be manufactured in modern, classical and project-specific styles.

Production may include:

Jambs
Headers
Mantels
Hearths
Corbels
Friezes
Overmantels
Columns
Carved decorative panels
Full-height wall cladding

Visit our limestone fireplace surrounds page.

Cornices and Mouldings

Custom limestone profiles may be manufactured for:

Façade cornices
String courses
Door surrounds
Window surrounds
Fireplace surrounds
Parapets
Interior walls
Classical façades

Possible profiles include:

Ogee
Cavetto
Cyma recta
Cyma reversa
Torus
Beads
Stepped mouldings
Dentils
Drip profiles
Custom combinations

Limestone Quoins

Quoins may be produced for building corners in:

Smooth finishes
Rusticated finishes
Bevelled forms
Projecting forms
Alternating lengths
Custom profiles

Carved Limestone Elements

DMR Limestone can manufacture custom carvings such as:

Floral motifs
Acanthus leaves
Rosettes
Scrolls
Geometric patterns
Crests
Monograms
Logos
Date stones
Decorative friezes
Relief panels
Cultural motifs

Production may combine CNC rough shaping with skilled hand finishing.

Limestone Signs and Logos

Custom signs may include:

Property names
Hotel logos
Company names
Villa numbers
Entrance monuments
Directional signs
Resort maps
Building addresses

Production options include:

CNC engraving
Recessed lettering
Raised limestone lettering
Relief carving
Sandblasted graphics
Metal-letter fixing holes
Backlighting recesses

Restoration and Replacement Stone

Cut-to-size production is suitable for restoring or reproducing historic architectural elements.

Possible products include:

Replacement façade panels
Window sills
Door frames
Cornices
Mouldings
Columns
Capitals
Balusters
Stair treads
Fireplaces
Wall caps
Carved details

Production may be based on:

Original samples
Physical templates
Historic drawings
Photographs
Three-dimensional scans
Adjacent surviving components

Visit our restoration projects page.

CNC Limestone Cutting

Computer-controlled machinery can be used for precise and repeated fabrication.

CNC capabilities may include:

Straight cutting
Curved cutting
Profiling
Grooving
Rebating
Drilling
Anchor preparation
Relief carving
Lettering
Three-dimensional shaping
Complex geometric production

CNC fabrication supports repeatability across multi-piece and multi-building projects.

CNC Profiling

CNC profiling may be used for:

Stair nosings
Pool coping
Wall caps
Window sills
Fireplace surrounds
Cornices
Door frames
Balustrade rails
Custom mouldings

Profiles should be supplied as dimensioned drawings, CAD files or approved templates.

CNC Carving

CNC carving may be used for:

Logos
Text
Decorative panels
Capitals
Friezes
Crests
Repeated motifs
Relief patterns

Highly detailed areas may require hand finishing after CNC machining.

Bridge-Saw Cutting

Bridge saws may be used for:

Rectangular panels
Tiles
Pavers
Stair treads
Window sills
Wall caps
Fireplace components
Slab cutting

Waterjet Limestone Cutting

Waterjet cutting may be used for:

Floor medallions
Wall inlays
Logos
Curved shapes
Decorative patterns
Thin geometric pieces
Metal-and-stone combinations

Suitability depends on the stone, thickness, required edge quality and design.

Limestone Turning

Turning may be used for:

Balusters
Round column components
Decorative posts
Finials
Fountain components
Circular bases
Sculptural elements

Maximum dimensions depend on stone block size, machinery capacity, component weight and geometry.

Three-Dimensional Limestone Fabrication

Three-dimensional production may be used for:

Capitals
Sculptural panels
Fireplace carvings
Historic reproductions
Custom decorative features
Complex columns
Statues
Relief artwork

Digital models should be checked and approved before production.

Production from Three-Dimensional Scans

Three-dimensional scans can support the reproduction of:

Historic capitals
Existing balusters
Carved fireplaces
Decorative panels
Mouldings
Sculptural elements
Complex curved stone

Scan data may require:

Cleaning
Scaling
Symmetry correction
Reconstruction of damaged areas
Conversion into a production model
Approval by the design or conservation team

Curved Limestone Fabrication

Curved components may be required for:

Façades
Walls
Columns
Arches
Staircases
Pool coping
Balustrades
Reception desks
Garden structures
Water features

Required information may include:

Inner radius
Outer radius
Arc angle
Segment length
Thickness
Joint width
Edge profile
Installation sequence

Mitred Limestone Fabrication

Mitred joints may create the appearance of thick solid stone using separate pieces.

Applications include:

Stair nosings
Fireplace walls
Entrance portals
Window reveals
Columns
Shelves
Wall caps
Reception desks
Benches

Mitred pieces require accurate cutting, bonding and edge finishing.

L-Shaped Limestone Components

L-shaped pieces may be produced as:

Solid elements
Mitred assemblies
Bonded fabricated pieces
Reinforced components

Applications include:

Drop-face coping
Stair steps
Corners
Wall caps
Fireplace returns
Façade details

Limestone Edge Profiles

Available edge treatments may include:

Sawn edge
Honed edge
Straight edge
Pencil edge
Chamfer
Bevel
Full bullnose
Half bullnose
Dupont-style profiles
Ogee
Cove
Custom moulded profiles

The edge profile should reflect the component thickness, application and design.

Bullnose Limestone Profiles

Bullnose profiles may be applied to:

Pool coping
Stair treads
Wall caps
Shelves
Benches
Fireplace hearths
Window sills

Chamfered Limestone Edges

Chamfers may help:

Reduce sharpness
Protect exposed corners
Create shadow lines
Support contemporary detailing
Improve handling

Chamfer dimensions should be specified in drawings.

Limestone Drip Grooves

Drip grooves may be produced beneath:

Window sills
Wall caps
Cornices
Pool coping
Balcony coping
Pier caps

Groove position, width and depth should be specified according to the architectural detail.

Grooves and Anti-Slip Channels

Grooves may be machined into:

Stair treads
Pool steps
Exterior pavers
Thresholds
Landscape steps

Groove design should consider:

Slip-resistance requirements
Cleaning
Edge distances
Stone thickness
Visual appearance

Rebates and Notches

Custom rebates and notches may be required for:

Window frames
Door frames
Pool covers
Mechanical fixings
Flashings
Lighting
Metal trims
Drainage
Adjacent materials

Detailed dimensions should be supplied before production.

Holes and Openings

DMR Limestone can produce openings for:

Mechanical anchors
Dowel fixings
Lighting fixtures
Electrical outlets
Plumbing
Speakers
Ventilation
Drains
Pool equipment
Metal lettering
Handrails

The location and dimensions should be provided through approved drawings or schedules.

Surface Finishes

Honed Limestone

Honed limestone has a smooth, matte appearance.

It is suitable for:

Interior flooring
Interior wall panels
Fireplace surrounds
Window sills
Entrance portals
Refined architectural elements

Brushed Limestone

Brushed limestone has a lightly textured and natural appearance.

It may be used for:

Exterior paving
Pool decks
Courtyards
Wall cladding
Landscape elements
Mediterranean architecture

Sandblasted Limestone

Sandblasted limestone creates a textured, non-reflective surface.

It is suitable for:

Exterior façades
Pool coping
Exterior stairs
Landscape paving
Wall caps
Commercial entrances

Tumbled Limestone

Tumbled limestone has softened edges and an aged appearance.

It may be used for:

Garden pathways
Mediterranean villas
Traditional courtyards
Rustic wall cladding
Paving
Landscape components

Bush-Hammered Limestone

Bush hammering creates a rough and consistent texture.

It may be used for:

Exterior stairs
Commercial walkways
High-traffic landscapes
Wall bases
Architectural plinths

Chiselled Limestone

Chiselled surfaces create visible linear or hand-tooled textures.

Applications may include:

Feature walls
Columns
Fireplace surrounds
Landscape walls
Restoration projects
Decorative bands

Sawn Limestone

Sawn limestone retains visible machine texture.

It may be supplied as a finished architectural surface or for further processing.

Combining Limestone Finishes

One project may use several finishes of the same limestone.

For example:

Honed interior flooring
Sandblasted façade panels
Brushed pool paving
Tumbled garden pathways
Chiselled feature walls
Honed window sills

This approach creates visual variety while maintaining a coordinated stone colour.

Limestone Thickness Options

Possible limestone thicknesses may include:

10 mm
12 mm
15 mm
20 mm
30 mm
40 mm
50 mm
Greater custom thicknesses

Availability and suitability depend on:

Stone type
Component size
Structural support
Application
Fixing method
Handling
Transport
Engineering requirements

Not every product is suitable in every thickness.

Selecting the Correct Thickness

The required thickness should consider:

Panel dimensions
Traffic
Structural loads
Point loads
Edge profile
Fixing holes
Curved geometry
Exterior exposure
Stone characteristics
Installation method
Local regulations

Façade panels, flooring, stair treads, coping and vehicle pavers should not automatically use the same thickness.

Dimensional Tolerances

Production tolerances depend on:

Stone type
Product dimensions
Thickness
Surface finish
Edge profile
Machinery
Carving detail
Installation requirements

Required tolerances should be stated in the project specification before quotation and production.

Natural stone should not be treated as a manufactured synthetic sheet material with no variation.

Calibrated Limestone

Thickness calibration may be used to create more consistent pieces for:

Floor tiles
Wall panels
Pavers
Stair components
Cladding
Modular products

The required tolerance should be confirmed according to the installation system.

Squareness and Flatness

For rectangular panels, quality control may include checks for:

Length
Width
Thickness
Squareness
Diagonal dimensions
Flatness
Edge condition
Surface finish

Large-format natural stone may require project-specific acceptance criteria.

Natural Stone Variation

Limestone may naturally contain:

Fossils
Shell fragments
Pores
Veining
Sedimentary markings
Tonal variation
Small natural voids

These characteristics are not automatically defects.

Representative samples should be approved before production.

Filling Natural Pores

Depending on the stone and project specification, natural pores may be:

Left open
Factory filled
Partially filled
Site filled
Filled with colour-matched material

The expected appearance should be confirmed through samples.

Architectural Drawings

Useful production documents include:

Plans
Elevations
Sections
Detailed profiles
Panel schedules
Door schedules
Window schedules
Stair schedules
Pool plans
Landscape plans
Cutting lists
Quantity schedules
CAD files
Three-dimensional models

Critical dimensions should be confirmed before production begins.

Shop Drawings

Shop drawings may show:

Individual stone dimensions
Thicknesses
Joint positions
Edge profiles
Holes
Rebates
Anchor slots
Curved geometry
Piece numbers
Installation locations
Crate references

Shop drawings may be prepared by the architect, contractor, façade company, pool specialist or stone installer.

Cutting Lists

A detailed cutting list may include:

Piece number
Length
Width
Thickness
Quantity
Surface finish
Edge finish
Profile
Hole details
Installation location
Drawing reference
Crate number

Clear cutting lists reduce ambiguity and support accurate production.

Physical Templates

Templates may be used for:

Irregular shapes
Curved walls
Existing openings
Restoration components
Fireplace profiles
Cornices
Staircases
Wall caps
Pool coping

Templates should be dimensionally stable, labelled and professionally verified.

Material Samples

Samples can help evaluate:

Colour
Fossils
Pores
Surface finish
Texture
Edge profile
Filling
Sealer effect
Natural variation

Small samples cannot always represent the full visual range of a large project.

Full-Size Samples

Full-size samples may be recommended for:

Façade panels
Stair treads
Pool coping
Wall caps
Window sills
Cornices
Carved elements
Textured wall panels

Project Mock-Ups

Mock-ups may include:

Stone panels
Joints
Fixings
Corners
Sealants
Adjacent materials
Surface finishes
Lighting
Cleaning treatments

The approved mock-up can become the quality reference for production and installation.

Factory Dry Layout

Selected products may be dry laid before packing.

Suitable products include:

Large floor panels
Feature walls
Fireplace surrounds
Door frames
Window surrounds
Pool coping
Curved components
Carved panels
Restoration stone

Dry layouts can help verify:

Colour distribution
Joint alignment
Pattern
Profile continuity
Piece numbering
Overall appearance

Colour Selection and Blending

Natural limestone may vary in:

Tone
Fossil content
Shell distribution
Pore structure
Veining
Sedimentary patterns

Colour blending can be organised according to:

Building
Elevation
Floor
Room
Pool
Villa
Landscape zone
Approved sample range

Piece Numbering

Each custom component can be numbered according to its installation location.

Numbering may identify:

Building
Elevation
Floor
Room
Grid
Window
Door
Stair
Pool
Landscape zone
Product type
Crate number

Numbering supports organised site installation.

Multi-Building Project Production

Large projects may include:

Main buildings
Guesthouses
Villas
Hotels
Restaurants
Pool houses
Landscape structures
Commercial units

Production can be separated according to:

Building
Zone
Phase
Floor
Elevation
Villa type
Installation programme

Repeated Components

Projects may require large quantities of repeated pieces such as:

Window sills
Façade panels
Stair treads
Pool coping
Wall caps
Balusters
Door surrounds

CNC and controlled factory production can support dimensional repeatability.

Value Engineering

Stone value engineering should maintain the design intent while improving manufacturability and material use.

Possible approaches include:

Adjusting panel modules
Coordinating dimensions with slab sizes
Reducing unnecessary unique pieces
Standardising repeated components
Simplifying hidden profiles
Reviewing mitred versus solid construction
Optimising thickness with professional engineering
Reducing excessive on-site cutting
Improving crate and installation sequencing

Value engineering should not reduce structural safety or required technical performance.

Slab and Block Optimisation

Cutting layouts may be developed to:

Reduce waste
Improve slab yield
Coordinate repeated dimensions
Separate premium visual areas
Reserve thicker material for profiles
Organise colour blending

Final yield depends on natural defects, block dimensions, slab dimensions and product geometry.

Production Process

A typical custom cut-to-size project may include:

Review of architectural drawings
Limestone selection
Material sampling
Surface-finish approval
Colour-range approval
Cutting-list review
Shop-drawing coordination
Block and slab selection
Primary cutting
Thickness calibration
Surface finishing
CNC fabrication
Edge profiling
Drilling and anchor preparation
Carving or three-dimensional processing
Dimensional inspection
Dry layout or trial assembly
Piece numbering
Packaging
Crate-list preparation

Quality Control

Quality-control procedures may include:

Block and slab inspection
Colour-range review
Dimension checks
Thickness control
Squareness checks
Flatness review
Surface-finish inspection
Edge-profile verification
Hole and rebate inspection
Curved-radius checks
Carving review
Mitre inspection
Piece-number control
Packaging inspection

Quality Reference Samples

Approved reference samples may be used to evaluate:

Colour range
Fossils
Pores
Texture
Filling
Edge treatment
Surface finish
Carving quality

Natural stone should be assessed against an approved range rather than one isolated small sample.

Packaging Cut-to-Size Limestone

Custom limestone products require packaging appropriate to their shape, size and weight.

Packaging may include:

Reinforced wooden crates
Pallets
A-frame supports
Vertical panel frames
Foam separators
Edge protectors
Surface protection
Carving supports
Bullnose protection
Custom internal supports
Piece labels
Crate lists

Packaging by Installation Sequence

Crates can be organised according to:

Building
Elevation
Floor
Room
Window
Door
Staircase
Swimming pool
Landscape zone
Construction phase

This can reduce unnecessary handling and make site installation more efficient.

Packaging Large Panels

Large panels may require:

Vertical support frames
A-frame transport
Padded separators
Edge restraints
Lifting instructions
Centre-of-gravity awareness
Specialist unloading plans

Packaging Carved Components

Carved limestone may require:

Custom-shaped supports
Protection around projecting details
Foam spacing
Restricted movement inside crates
Clear lifting and opening instructions

Export and Shipping

Shipment planning should consider:

Component weight
Crate dimensions
Container capacity
Port limitations
Transport route
Site unloading
Crane access
Storage
Installation order

Large, curved, carved and solid stone pieces may require special handling.

Site Storage

Cut-to-size limestone should be stored:

On stable supports
Away from mud
Protected from impact
According to crate labels
In suitable ventilation
Away from acidic chemicals
According to installation sequence
Without trapping damaging moisture

Installation

Installation should be completed by experienced natural stone contractors.

Depending on the product, installation may involve:

Natural stone adhesive
Mortar
Mechanical anchors
Stainless-steel brackets
Support rails
Dowels
Structural grout
Waterproof membranes
Movement joints
Drainage systems

The correct installation method depends on the component, substrate, exposure and engineering requirements.

Structural Engineering

Qualified professionals should assess:

Dead load
Wind load
Seismic load
Traffic loads
Guard loads
Fixing capacity
Deflection
Stone strength
Point loads
Overhead safety
Support conditions

DMR Limestone manufactures according to approved technical information but does not replace structural or façade engineering.

Water Management

Exterior and wet-area stone should coordinate with:

Waterproofing
Flashings
Drainage cavities
Sill slopes
Drip grooves
Pool systems
Roof membranes
Movement joints
Surface falls

Natural stone is not the complete waterproofing system.

Freeze–Thaw Conditions

Cold-climate projects should evaluate:

Water absorption
Freeze–thaw resistance
Drainage
Joint saturation
Snow
Ice
De-icing chemicals
Pool winterisation
Fixing details

Coastal Environments

Coastal projects should consider:

Salt spray
High humidity
Strong wind
Salt crystallisation
Corrosion-resistant fixings
Drainage
Regular rinsing
Maintenance access

Hot Climates

Hot-climate projects should consider:

Surface temperatures
Thermal movement
Strong sunlight
Expansion joints
Pool chemicals
Dust
Cleaning frequency

Limestone Sealing

A breathable natural stone sealer may be considered depending on:

Stone type
Surface finish
Interior or exterior use
Pool exposure
Food exposure
Pollution
Maintenance requirements

The selected sealer should be tested on a sample before full application.

Sealing does not replace correct installation, waterproofing or maintenance.

Cleaning and Maintenance

Recommended practices include:

Use pH-neutral natural stone cleaners
Avoid acidic chemicals
Avoid vinegar
Clean spills promptly
Remove grit and organic matter
Maintain drainage
Inspect joints
Avoid uncontrolled aggressive pressure washing
Test cleaning products before use

Acidic products can etch limestone.

Cut-to-Size Limestone for Architects

DMR Limestone supports architects with project-specific fabrication.

Support may include:

Limestone selection
Finish samples
Panel-size review
Profile development
Large-format production
Curved fabrication
CNC machining
Carving samples
Mock-up components
Piece numbering
Packaging planning

Visit our architects page.

Cut-to-Size Limestone for Contractors

Contractors should provide:

Architectural drawings
Cutting lists
Individual dimensions
Thicknesses
Surface finishes
Edge profiles
Fixing requirements
Quantities
Project location
Delivery destination
Installation sequence
Production programme

Visit our contractors page.

Cut-to-Size Limestone for Importers

Importers may order:

Project-specific panels
Standard and custom tiles
Pavers
Pool coping
Window sills
Stair treads
Wall caps
Architectural elements
Mixed-product containers
Private-label collections

Visit our importers page.

Cut-to-Size Limestone for Stone Distributors

Stone distributors can source:

Standard cut sizes
Custom project orders
Slabs
Flooring
Cladding
Coping
Stairs
Fireplace components
Landscape stone
Architectural elements

Visit our stone distributors page.

Cut-to-Size Limestone for Luxury Residential Projects

Residential packages may include:

Façade panels
Flooring
Wall panels
Stairs
Window sills
Door surrounds
Fireplaces
Pool coping
Pavers
Wall caps
Carved elements

Visit our luxury residential projects page.

Cut-to-Size Limestone for Hotels and Resorts

Hospitality projects may require stone for:

Façades
Entrances
Lobbies
Guestroom areas
Restaurants
Spas
Pools
Resort villas
Landscapes

Explore our hotel and resort projects page.

Cut-to-Size Limestone for Commercial Buildings

Commercial applications may include:

Façade panels
Entrance portals
Lobby floors
Reception walls
Corporate logos
Staircases
Window sills
Exterior plazas

Visit our commercial buildings page.

Why Choose DMR Limestone?

DMR Limestone manufactures project-specific Turkish limestone for international architectural and landscape projects.

Our cut-to-size capabilities include:

Standard and custom panels
Large-format limestone
Floor tiles
Wall panels
Façade cladding
Stair components
Window sills
Door and window frames
Pool coping
Pavers
Wall caps
Pier caps
Fireplace surrounds
Columns
Capitals
Balustrades
Cornices
Mouldings
Curved stone
CNC fabrication
Waterjet cutting
Turning
Three-dimensional carving
Hand finishing
Anchor preparation
Piece-numbered production
Installation-sequence packaging

From a single replacement sill to a complete multi-building architectural package, DMR Limestone can manufacture coordinated natural stone products according to project drawings, dimensions and technical requirements.

Frequently Asked Questions About Custom Cut-to-Size Limestone

What is cut-to-size limestone?

Cut-to-size limestone is natural stone manufactured according to project-specific lengths, widths, thicknesses, finishes and profiles.

Can limestone be manufactured to custom dimensions?

Yes. Panels, tiles, stairs, coping, sills, frames and architectural components can be produced according to detailed drawings.

Can you produce both small and large quantities?

Project feasibility depends on the stone, dimensions, complexity and total quantity. Both small custom orders and large project packages may be considered.

Can you produce one replacement limestone piece?

Single-piece production may be possible, subject to stone availability, dimensions, fabrication complexity and commercial feasibility.

Which limestone colours are available?

DMR Limestone supplies selected white, cream and beige Turkish limestone.

Can you manufacture Limra limestone to custom sizes?

Yes. Limra limestone can be produced as panels, tiles, sills, stairs, frames, coping and architectural elements.

Which files are required for production?

Useful files include PDF drawings, CAD files, cutting lists, three-dimensional models, templates and detailed schedules.

Can you work from hand drawings?

Simple components may be reviewed from clearly dimensioned drawings, but complex production generally requires accurate technical files.

Can you work from a physical template?

Yes. Templates can be used for irregular, curved and replacement components.

Can you work from a three-dimensional scan?

Yes. Scan data may support the reproduction of complex or historic elements after digital preparation.

Can you manufacture large-format limestone panels?

Yes. Maximum dimensions depend on block size, slab availability, stone structure, thickness, transport and installation requirements.

Can you manufacture thin limestone panels?

Selected materials and panel dimensions may be available in thinner formats. Suitability depends on handling, fixing and project conditions.

What thicknesses are available?

Possible thicknesses may range from thin tile formats to thick solid architectural components. Availability depends on the stone and product.

Can exact dimensions be guaranteed?

Production can follow agreed dimensional tolerances. Required tolerances should be stated before production.

Can limestone be thickness calibrated?

Yes. Selected tiles and panels can be calibrated according to project requirements.

Can you manufacture façade panels?

Yes. Standard, large-format, curved, rusticated and mechanically fixed façade panels can be produced.

Can you prepare anchor slots?

Yes. Kerfs, dowel holes, anchor holes and bracket recesses can be machined according to approved engineering drawings.

Can you manufacture interior wall panels?

Yes. Full-height, large-format, curved, fireplace and decorative wall panels can be produced.

Can you manufacture custom limestone floor tiles?

Yes. Square, rectangular, modular, random-length and large-format flooring can be manufactured.

Can you produce French-pattern flooring?

Yes. Coordinated sets can be produced according to the required pattern dimensions.

Can you produce limestone stairs?

Yes. Treads, risers, landings, solid steps, curved steps and custom nosing profiles can be manufactured.

Can you manufacture anti-slip grooves?

Yes. Grooves can be produced according to approved dimensions and safety requirements.

Can you manufacture window sills?

Yes. Sills can include slopes, drip grooves, rebates, notches, horns and custom profiles.

Can you manufacture door and window surrounds?

Yes. Jambs, lintels, thresholds, architraves, keystones, arches and custom entrance portals can be produced.

Can you manufacture limestone arches?

Yes. Voussoirs, keystones and curved mouldings can be manufactured from approved radius drawings.

Can you manufacture pool coping?

Yes. Bullnose, straight-edge, drop-face, curved and infinity-pool coping can be produced.

Can you manufacture curved pool coping?

Yes. Inner radius, outer radius, arc angle and profile details are required.

Can you produce wall caps?

Yes. Flat, sloped, saddleback, bullnose, moulded and curved wall caps can be produced.

Can you manufacture pier caps?

Yes. Flat, pyramid, hipped, round and custom pier caps can be supplied.

Can you manufacture fireplace surrounds?

Yes. Modern, classical, carved and full-height fireplace packages can be produced.

Can you manufacture limestone columns and capitals?

Yes. Round, square, fluted and custom columns can be manufactured with matching bases and capitals.

Can you manufacture balustrades?

Yes. Balusters, rails, posts and curved balustrade components can be produced.

Can you manufacture cornices and mouldings?

Yes. Standard and custom profiles can be produced from drawings, templates or existing samples.

Can you produce carved limestone?

Yes. Logos, crests, monograms, floral patterns, geometric reliefs and custom decorative panels can be manufactured.

Is carving completed by CNC?

Production may combine CNC machining with hand carving and hand finishing.

Can you manufacture curved stone panels?

Yes. Curved façade, wall, column, stair, coping and landscape components can be produced.

Can you produce mitred limestone pieces?

Yes. Mitred stairs, fireplaces, entrance portals, wall panels, columns and coping can be manufactured.

Can you produce L-shaped limestone components?

Yes. Solid, mitred or fabricated L-shaped components may be produced where technically appropriate.

Can you drill holes and cut openings?

Yes. Holes, outlets, service openings, lighting recesses, drain openings and fixing details can be manufactured.

Can you produce logos and lettering?

Yes. Logos, text and signs can be engraved, carved, recessed or prepared for metal lettering.

Which surface finishes are available?

Possible finishes include honed, brushed, sandblasted, tumbled, bush hammered, chiselled, sawn and custom textures.

Can several finishes be used on the same project?

Yes. Different finishes can be applied to the same limestone for façades, interiors, pools and landscapes.

Are pores and fossils defects?

No. Natural pores, fossils, shell fragments and tonal variations are characteristic features of limestone.

Can uniform colour be guaranteed?

Limestone is a natural material. Colour can be managed within an approved range, but complete artificial uniformity cannot be guaranteed.

Can stone pieces be colour blended?

Yes. Products may be blended by elevation, room, building, pool or landscape zone.

Can panels be dry laid before shipment?

Yes. Selected floors, walls, fireplaces, frames, coping and custom components can be dry laid or trial assembled.

Can every piece be numbered?

Yes. Components can be numbered according to their installation position.

Can products be packaged by building or installation zone?

Yes. Crates can be organised by building, elevation, floor, room, pool, villa or construction phase.

Can you package products in installation order?

Yes. Installation-sequence packaging may be prepared when the required information is supplied.

Can you provide shop drawings?

Shop-drawing responsibilities depend on the agreed project scope. Approved production drawings and dimensions are required before fabrication.

Can you optimise cutting dimensions to reduce waste?

Yes. Panel modules and cutting layouts may be reviewed to improve material yield while maintaining the design intent.

Can limestone be used outdoors?

Yes, when the selected material, thickness, finish, fixing and detailing are appropriate for the application and climate.

Can cut-to-size limestone be used in coastal projects?

Yes, provided salt exposure, corrosion-resistant fixings, drainage and maintenance are considered.

Can limestone be used in freeze–thaw climates?

Selected limestone may be suitable, but material performance, saturation, drainage and installation details require project-specific evaluation.

Does limestone need sealing?

Sealing depends on the material, finish, application and exposure. A suitable limestone sealer may be considered after testing.

How should limestone be cleaned?

Use pH-neutral natural stone cleaners. Avoid acidic chemicals, vinegar and uncontrolled aggressive cleaning.

What information is required for a quotation?

Please provide:

Architectural drawings
Cutting lists
Individual dimensions
Required thicknesses
Preferred limestone
Surface finishes
Edge profiles
Curved radii
Hole and rebate details
Fixing requirements
Required quantities
Project location
Delivery destination
Production programme

Request Custom Cut-to-Size Limestone Samples and Pricing

Are you planning a custom limestone project for a villa, hotel, resort, commercial building, interior, pool, landscape or restoration?

Contact DMR Limestone to request:

Turkish limestone samples
White and Limra limestone options
Surface-finish samples
Custom façade panels
Floor tiles and slabs
Interior wall panels
Stair treads and risers
Window sills
Door and window surrounds
Pool coping
Pavers
Wall and pier caps
Fireplace surrounds
Columns and capitals
Balustrades
Cornices and mouldings
Curved components
Carved limestone
CNC fabrication
Waterjet cutting
Hand finishing
Factory dry layouts
Piece-numbered production
Installation-sequence packaging
Project-specific pricing

Send us your architectural drawings, cutting lists, dimensions, thicknesses, preferred finishes, quantities and delivery destination to receive a customised cut-to-size limestone quotation.