Capabilities - Dmr Limestone

Limestone Manufacturing Capabilities

DMR Limestone manufactures standard and custom Turkish limestone products for architectural, residential, hospitality, commercial, façade, interior, pool and landscape projects worldwide.

Our capabilities support:

Architects
Interior designers
Façade consultants
Main contractors
Stone contractors
Natural stone importers
Stone distributors
Developers
Hotel groups
Villa builders
Landscape architects
Local stone fabricators

We manufacture limestone according to approved:

Architectural drawings
Stone schedules
Cutting lists
Façade elevations
Interior elevations
Pool plans
Landscape plans
Staircase drawings
CAD files
BIM exports
Three-dimensional models
Physical templates
Full-size mock-ups
Approved material samples

Our project capabilities may include:

Material sourcing and selection
Block and slab review
Colour-range coordination
Surface-finish development
Cut-to-size limestone production
CNC stone fabrication
Curved limestone production
Architectural stone carving
Hand finishing
Façade-panel manufacturing
Anchor-slot and fixing preparation
Columns, capitals and balustrades
Stair and fireplace production
Pool-coping fabrication
Full-size mock-ups
Dry layout and trial assembly
Dimensional inspection
Piece numbering
Project-area packaging
Private-label production
Export documentation
International shipment preparation

DMR Limestone works as a project-based limestone manufacturer and supplier, supporting both individual custom pieces and coordinated multi-product stone packages.

Explore Our Limestone Capabilities

Limestone Manufacturing

Our limestone-manufacturing capability covers the conversion of selected blocks and slabs into finished architectural products.

Production may include:

Primary block cutting
Slab cutting
Strip cutting
Thickness calibration
Surface finishing
Precision sizing
Edge profiling
Drilling
Grooving
Rebating
Curved cutting
CNC machining
Carving
Hand finishing
Dimensional inspection
Packaging

Visit our Limestone Manufacturing page.

Material and Block Selection

Material selection may consider:

Colour
Tone
Fossil content
Shell fragments
Pore structure
Sedimentary markings
Block size
Slab dimensions
Product format
Surface finish
Interior or exterior use
Climate exposure
Required technical characteristics
Project quantity
Visual consistency requirements

Visit our Material and Block Selection page.

Cut-to-Size Limestone Production

DMR Limestone manufactures custom limestone according to approved dimensions and profiles.

Cut-to-size production may include:

Rectangular pieces
Square pieces
Plank formats
Modular layouts
Random lengths
Large-format panels
Curved segments
Angled pieces
Mitred components
Custom-thickness products
Numbered project pieces

Visit our Cut-to-Size Limestone page.

CNC Stone Fabrication

CNC processing enables controlled and repeatable production of complex architectural elements.

CNC capabilities may include:

Precision profiling
Curved cutting
Drilling
Grooving
Rebating
Anchor preparation
Fixing holes
Lettering
Logos
Relief carving
Geometric patterns
Repeated decorative elements
Three-dimensional forms

Visit our CNC Stone Fabrication page.

Architectural Stone Carving

Architectural carving may combine CNC machining with skilled hand finishing.

Products may include:

Decorative panels
Floral motifs
Geometric patterns
Crests
Monograms
Building names
Arabic calligraphy
Relief carvings
Friezes
Capitals
Corbels
Keystones
Custom sculptures
Traditional architectural details

Visit our Architectural Stone Carving page.

Handcrafted Limestone Elements

Selected limestone elements may require hand finishing to refine:

Carved details
Profiles
Capitals
Cornices
Relief panels
Arches
Fireplace components
Balustrades
Decorative mouldings
Surface textures
Edge transitions

Visit our Handcrafted Limestone page.

Surface Finishing

Available finishes depend on the selected limestone and intended application.

Potential finishes include:

Honed
Sandblasted
Brushed
Tumbled
Fine-textured
Grooved
Fluted
Bush-hammered where suitable
Chiselled where suitable
Custom combinations
Project-specific textures

Visit our Limestone Surface Finishes page.

Façade Panel Manufacturing

DMR Limestone manufactures stone panels for professionally designed façade systems.

Façade production may include:

Standard panels
Large-format panels
Horizontal courses
Vertical panels
Curved panels
Corner pieces
Quoins
Rusticated panels
Window surrounds
Entrance portals
Cornices
Parapet coping
Custom profiles
Numbered installation pieces

Visit our Façade Panel Manufacturing page.

Columns, Capitals and Architectural Elements

Architectural stone elements may include:

Round columns
Square columns
Fluted columns
Smooth columns
Tapered columns
Column drums
Half columns
Pilasters
Tuscan capitals
Doric capitals
Ionic capitals
Corinthian capitals
Composite capitals
Contemporary capitals
Arches
Keystones
Cornices
Balustrades
Decorative mouldings

Visit our Architectural Stone Elements page.

Curved and Complex Limestone Fabrication

Curved stone may be manufactured for:

Façade panels
Pool coping
Arches
Staircases
Columns
Wall caps
Planter caps
Entrance portals
Benches
Water features
Reception desks
Custom interior walls

Visit our Curved Limestone Fabrication page.

Mock-Ups and Dry Layout

Mock-ups and trial assembly may support:

Material approval
Colour-range approval
Surface-finish approval
Joint coordination
Edge-profile approval
Fixing review
Pattern continuity
Curved geometry
Installation planning
Quality-control references

Visit our Mock-Ups and Dry Layout page.

Quality Control

Quality-control procedures may include:

Material inspection
Colour-range review
Dimensional inspection
Thickness control
Squareness
Flatness
Surface-finish review
Profile inspection
Hole-position checks
Anchor-preparation checks
Radius verification
Carving review
Piece-number review
Packaging inspection

Visit our Quality Control page.

Project Packaging and Piece Numbering

Custom pieces may be numbered and packed according to:

Development
Building
Villa
Façade elevation
Floor
Room
Window
Door
Staircase
Fireplace
Pool
Terrace
Landscape zone
Installation sequence

Visit our Project Packaging page.

Export and International Logistics

Export preparation may include:

Reinforced wooden crates
Pallets
A-frame supports
Vertical panel frames
Edge protection
Profile protection
Piece labels
Crate lists
Packing lists
Container-loading coordination
Mixed-product planning
Export documentation support

Visit our Export and International Logistics page.

Project-Based Limestone Manufacturing

DMR Limestone does not only supply standard tiles or slabs.

We manufacture coordinated limestone packages for projects that may require:

Several product categories
Multiple stone thicknesses
Different surface finishes
Custom profiles
Curved components
Numbered installation pieces
Building-specific packaging
Floor-specific packaging
Villa-specific packaging
Phased production
Phased shipment
Spare material
Future replacement records

A single project package may include:

Façade panels
Interior flooring
Interior wall panels
Exterior pavers
Pool coping
Stair components
Window sills
Door surrounds
Fireplace surrounds
Wall caps
Pier caps
Planter coping
Columns
Capitals
Balustrades
Arches
Cornices
Custom signs
Carved architectural elements

Limestone Manufacturing for Different Project Types

Luxury Residential Projects

Residential packages may include:

Villa façades
Entrance portals
Window surrounds
Interior flooring
Staircases
Fireplace surrounds
Pool coping
Terrace paving
Garden pathways
Wall caps
Pier caps
Columns
Custom decorative stone

Explore our Luxury Residential Projects page.

Villa Projects

Villa manufacturing may be organised according to:

Villa type
Villa number
Façade elevation
Floor
Room
Pool
Landscape area
Construction phase

Repeated villa types can be manufactured using:

Standardised piece codes
Approved profile templates
Repeated cutting lists
Type-specific crate labels
Controlled colour distribution
Project-phase planning

Visit our Villa Projects page.

Hotel and Resort Projects

Hospitality manufacturing may include:

Façade panels
Lobby floors
Reception walls
Restaurant flooring
Pool coping
Pool-deck paving
Spa interiors
Staircases
Fireplace surrounds
Columns
Custom signs
Carved logos
Landscape stone

Visit our Hotel and Resort Projects page.

Commercial Projects

Commercial project packages may include:

Façade panels
Entrance stone
Reception flooring
Interior wall cladding
Lift-lobby stone
Staircases
Window sills
Custom signs
Corporate logos
Feature walls

Visit our Commercial Projects page.

Façade Projects

Façade manufacturing may include:

Material selection
Panel optimisation
Cutting-list review
Thickness coordination
Fixing preparation
Corner solutions
Window-surround production
Panel numbering
Elevation-based packaging
Mock-up production
Replacement-piece records

Visit our Limestone Façade Projects page.

Interior Projects

Interior manufacturing may include:

Large-format flooring
Feature walls
Full-height panels
Fluted limestone
Grooved panels
Curved walls
Staircases
Fireplace surrounds
Reception desks
Custom furniture components

Visit our Interior Stone Projects page.

Pool and Landscape Projects

Landscape packages may include:

Straight pool coping
Curved pool coping
Drop-face coping
Pool-deck pavers
Terrace paving
Garden pathways
Exterior stairs
Wall caps
Planter coping
Benches
Water-feature stone
Custom drain covers

Visit our Pool and Landscape Projects page.

Limestone Products We Manufacture

Our manufacturing capabilities support:

Limestone pavers
Limestone tiles
Limestone slabs
Limestone wall cladding
Limestone facade panels
Limestone columns
Limestone capitals
Limestone balustrades
Limestone window sills
Limestone door and window frames
Limestone fireplace surrounds
Limestone stairs
Limestone pool coping
Limestone pier caps
Limestone wall caps
Custom cut-to-size limestone

Limestone Materials

Our material categories include:

Turkish limestone
Limra limestone
White limestone
Antalya limestone
Beige limestone

Material availability, block dimensions, colour range and technical characteristics should be confirmed for each project.

Limestone Surface Finishes

Honed Limestone

Honed limestone provides a smooth, matte surface.

It may be selected for:

Interior flooring
Wall panels
Fireplace surrounds
Staircases
Window sills
Reception areas
Large-format interiors

Sandblasted Limestone

Sandblasted limestone provides a controlled textured appearance.

It may be considered for:

Façade panels
Exterior paving
Pool surrounds
Exterior stairs
Entrance areas
Landscape products

Brushed Limestone

Brushed limestone provides a softly textured surface.

It may be considered for:

Covered terraces
Interior–exterior transitions
Pool areas
Garden pathways
Courtyards
Selected wall applications

Tumbled Limestone

Tumbled limestone has softened edges and an aged appearance.

It may be selected for:

Traditional interiors
Country residences
Restaurants
Modular floors
Courtyards
Renovation-inspired projects

Cut-to-Size Limestone Capability

Cut-to-size production may be based on:

Finished dimensions
Nominal dimensions
Joint dimensions
Cutting lists
Stone schedules
Shop drawings
Approved templates
Digital models

Potential formats include:

Standard tiles
Large-format tiles
Planks
Random lengths
Modular sets
Façade panels
Stair treads
Window sills
Wall caps
Pool coping
Curved pieces
Custom profiles

Production information should clearly identify:

Length
Width
Thickness
Finished face
Surface finish
Edge finish
Orientation
Quantity
Tolerance
Product code
Drawing reference

CNC Limestone Fabrication Capability

CNC stone fabrication may be used for:

Repeated profiles
Curved geometry
Complex cut-outs
Mechanical-fixing preparation
Decorative panels
Signs
Logos
Lettering
Relief patterns
Architectural mouldings
Custom furniture components

CNC production requires clear information such as:

Approved CAD geometry
Dimensions
Radii
Depths
Tooling details
Finished faces
Tolerances
Surface finish
Quantity
Installation orientation

CNC machining may still require hand finishing depending on:

Stone characteristics
Profile complexity
Required appearance
Internal corners
Surface texture
Carving detail

Curved Limestone Capability

Curved components may be produced from:

Approved CAD files
Three-dimensional models
Radius schedules
Physical templates
Site-survey information

Required information may include:

Inner radius
Outer radius
Arc angle
Segment length
Chord length
Thickness
Joint width
Edge profile
Finished surface
Installation direction

Curved limestone products may include:

Pool coping
Façade panels
Wall cladding
Arches
Stair treads
Wall caps
Planter coping
Reception desks
Benches
Water features

Mitred Limestone Capability

Mitred stone may create the appearance of a thicker solid element.

Applications may include:

Pool coping
Stair nosings
Fireplace surrounds
Entrance portals
Wall caps
Benches
Planters
Window reveals
Reception desks
Vanity components

Mitred products require coordination of:

Finished dimensions
Bonding surfaces
Joint locations
Reinforcement where required
Thermal movement
Handling
Packaging
Installation

A mitred assembly should not automatically be treated as equivalent to one solid stone block.

Façade Panel Manufacturing Capability

Façade-panel production may include:

Panel cutting
Thickness calibration
Surface finishing
Edge finishing
Fixing slots
Dowel holes
Undercut-anchor holes
Bracket recesses
Support notches
Lifting holes
Corner fabrication
Piece numbering
Elevation-based packaging

Potential panel forms include:

Rectangular panels
Long horizontal courses
Vertical panels
Large-format panels
Curved panels
Rusticated panels
Return panels
Mitred corners
Solid corners
Quoins
Decorative panels

The complete façade system should be designed by qualified:

Architects
Façade engineers
Structural engineers
Fire consultants
Building-envelope consultants
Local code professionals

DMR Limestone manufactures stone components according to approved project information and does not replace complete façade-system engineering.

Architectural Stone Carving Capability

Carved limestone may be produced for:

Luxury villas
Private estates
Hotels
Resorts
Cultural buildings
Commercial entrances
Mosques
Memorial projects
Restoration-inspired architecture

Carving may include:

Floral reliefs
Geometric designs
Classical mouldings
Arabic calligraphy
Building names
Logos
Crests
Monograms
Capitals
Corbels
Friezes
Keystones
Custom decorative panels

Production may combine:

CNC rough shaping
CNC detail machining
Hand refinement
Surface finishing
Edge correction
Trial assembly

Columns and Capitals Manufacturing

Columns may be manufactured as:

Solid sections where practical
Column drums
Cladding sections
Half columns
Pilasters
Round columns
Square columns
Fluted columns
Smooth columns
Tapered columns

Capital styles may include:

Tuscan
Doric
Ionic
Corinthian
Composite
Simplified classical forms
Contemporary geometric designs
Custom architect-designed capitals

Column projects should define:

Total height
Shaft diameter or width
Number of drums
Joint positions
Base profile
Capital profile
Flute dimensions
Structural core
Fixing method
Finished orientation

Decorative limestone columns should not automatically be assumed to be load-bearing structural elements.

Limestone Balustrade Manufacturing

Balustrade components may include:

Turned balusters
Square balusters
Top rails
Bottom rails
Newel posts
Stair rails
Curved rails
Post caps
Base blocks

Production should be based on approved:

Baluster spacing
Rail geometry
Stair angle
Curve radius
Fixing details
Structural requirements
Guard heights
Opening restrictions
Pool-safety requirements

The complete balustrade system must be designed and approved by qualified project professionals.

Pool Coping Manufacturing

Pool coping may be manufactured as:

Straight pieces
Pencil-edge coping
Half bullnose
Full bullnose
Drop-face coping
Rebated coping
Mitred coping
Curved coping
Radius corners
Custom transition pieces

Pool plans should identify:

Inner dimensions
Outer dimensions
Radii
Coping width
Thickness
Edge profile
Joint width
Step locations
Skimmer locations
Drain details
Installation direction

Individual pieces may be numbered according to the pool plan.

Limestone Stair Manufacturing

Stair products may include:

Treads
Risers
Landings
Winder steps
Curved steps
Solid block steps
Stair skirting
Bullnose nosings
Mitred drop faces
Anti-slip grooves
Insert recesses

Required information may include:

Finished tread depth
Riser height
Stair width
Nosing profile
Joint position
Support condition
Finished edges
Surface finish
Installation orientation

Fireplace Manufacturing

Fireplace components may include:

Jambs
Headers
Mantel shelves
Hearths
Corbels
Friezes
Overmantels
Full-height wall panels
Mitred surrounds
Curved components
Carved profiles

Fireplace production should be coordinated with:

Appliance dimensions
Heat clearances
Hearth requirements
Structural support
Wall build-up
Local safety requirements
Installation method

Window Sill Manufacturing

Window sills may be manufactured with:

Sloped top surfaces
Drip grooves
Front overhangs
Side returns
Horns
Rebates
Notches
Curved fronts
Custom profiles

Exterior sill details should coordinate with:

Window frames
Flashing
Waterproofing
Insulation
Façade panels
Sealants
Drainage
Joint positions

Wall and Pier Cap Manufacturing

Wall caps may include:

Flat caps
Single-slope caps
Double-slope caps
Saddleback coping
Bullnose caps
Curved caps
Seating-wall caps

Pier caps may include:

Flat caps
Pyramid caps
Hipped caps
Round caps
Lighting-ready caps
Custom profiles

Exterior caps should consider:

Surface falls
Drip grooves
Overhang
Joint location
Waterproofing
Wall width
Climate exposure

Mock-Up Capability

Mock-ups may be manufactured for:

Façade panels
Wall cladding
Interior flooring
Pool coping
Stairs
Window sills
Fireplaces
Entrance portals
Columns
Carved panels
Surface finishes
Fixing preparations

A full-size mock-up may help confirm:

Material appearance
Natural variation
Surface finish
Edge profile
Joint width
Sealant colour
Grout colour
Adjacent materials
Fixing method
Lighting conditions
Cleaning expectations

An approved mock-up may become the project’s quality reference.

Dry Layout Capability

Dry layout may be used for:

Large-format floors
Feature walls
Fireplace surrounds
Pool coping
Staircases
Entrance portals
Arches
Columns
Carved panels
Custom paving patterns

Dry layout may help review:

Colour distribution
Fossil distribution
Pattern continuity
Joint alignment
Curved geometry
Profile continuity
Piece numbering
Overall visual balance

Dry layout does not replace final site verification or installation responsibility.

Piece Numbering Capability

Piece numbers may relate to:

Project
Development
Building
Villa
Elevation
Floor
Room
Window
Door
Staircase
Fireplace
Pool
Terrace
Landscape zone
Crate

Piece numbering may be shown on:

Stone labels
Crate labels
Packing lists
Dry-layout drawings
Installation diagrams
Production photographs

Quality-Control Capability

Quality control may be based on:

Approved samples
Approved colour ranges
Approved mock-ups
Approved drawings
Agreed tolerances
Agreed natural-stone criteria
Product-specific inspection plans

Checks may include:

Material type
Colour range
Fossil content
Pore structure
Length
Width
Thickness
Squareness
Flatness
Edge straightness
Surface finish
Profile geometry
Hole position
Slot position
Radius
Piece number
Quantity
Packaging

Dimensional Inspection

Required tolerances should be agreed before manufacturing.

Tolerances may relate to:

Length
Width
Thickness
Squareness
Flatness
Edge straightness
Profile dimensions
Hole diameter
Hole position
Slot dimensions
Slot position
Radius
Arc length

Tighter tolerances may affect:

Material selection
Production method
Inspection frequency
Manufacturing time
Cost
Packaging

Natural Stone Visual Inspection

Limestone is a natural material.

Visual variation may include:

Colour differences
Fossils
Shell fragments
Pores
Sedimentary markings
Mineral details
Natural veins
Surface response

Visual quality should be evaluated against:

Approved range samples
Approved mock-ups
Project acceptance criteria
Intended installation area
Agreed blending strategy

Perfect visual uniformity should not be expected unless a restricted selection has been specifically agreed and is technically achievable.

Project Packaging Capability

Packaging may include:

Reinforced wooden crates
Pallets
A-frame supports
Vertical panel frames
Foam separators
Protective sheets
Edge guards
Bullnose protection
Profile protection
Carving supports
Piece labels
Crate lists

Packaging is selected according to:

Product dimensions
Weight
Thickness
Surface finish
Edge profile
Curved geometry
Fragility
Transport route
Final site access
Unloading method
Temporary storage conditions

Packaging by Installation Area

Crates may be organised by:

Building
Villa
Façade elevation
Floor
Room
Hotel zone
Pool
Terrace
Courtyard
Landscape area
Staircase
Installation sequence
Construction phase

Area-based packaging may reduce:

Unnecessary unpacking
Double handling
Site congestion
Search time
Damage
Installation delays

Restricted-Access Packaging

Projects with restricted access may require:

Smaller crates
Reduced crate weights
Lift-compatible packages
Crane-compatible packages
Manual-handling groups
Floor-specific labels
Installation-sequence packaging
Phased deliveries

The buyer should provide:

Maximum crate dimensions
Maximum crate weight
Forklift capacity
Crane capacity
Lift dimensions
Door dimensions
Storage limitations
Delivery sequence

Private-Label Capability

Private-label coordination may include:

Buyer product names
Product codes
Barcodes
Crate labels
Pallet labels
Sample-board references
Local-language descriptions
Packaging quantities
Collection names
Customer references

Private-label requirements should be approved before production and packaging.

Mixed-Product Shipment Capability

Compatible products may be combined in one shipment, including:

Tiles and pavers
Pavers and pool coping
Wall panels and wall caps
Flooring and stair components
Window sills and tiles
Slabs and selected crates
Columns and capitals
Standard and custom products

Mixed loading depends on:

Product weight
Crate size
Fragility
A-frame position
Safe stacking
Container limits
Unloading method
Destination requirements

Export Documentation Support

Depending on the agreed scope, export documentation may include:

Commercial invoice
Packing list
Crate list
Product descriptions
Quantity information
Weight information
Product references
Origin-related documentation where applicable
Transport documents
Available technical documentation
Buyer-approved labels

The importer or customs representative should confirm:

Customs classification
Duties and taxes
Destination requirements
Import licences
Conformity procedures
Product-specific documentation
Wooden-packaging requirements
Local unloading procedures

DMR Limestone should not be relied upon to provide legal, tax or customs advice.

International Markets

DMR Limestone supports project enquiries through regional market pages:

North America
Europe
Middle East
Oceania

Project requirements may vary according to:

Climate
Building regulations
Import procedures
Measurement systems
Façade standards
Slip-resistance requirements
Frost exposure
Coastal salt
Wind loads
Seismic conditions
Cyclonic conditions
Packaging requirements
Site access

Technical Documentation Capability

Depending on the selected limestone and project requirements, available information may include:

Material description
Product dimensions
Surface-finish information
Tolerance information
Available test reports
Weight information
Packing lists
Production references
Traceability information
Project-specific submittals
Installation recommendations
Sample records
Mock-up records

The project team should identify the required:

Standard
Test method
Acceptance criteria
Laboratory
Sampling method
Product dimensions
Testing frequency
Submission format

One technical report should not automatically be treated as proof of suitability for every product, thickness, finish, climate or installation system.

Drawing Coordination Capability

Useful manufacturing documents include:

Plans
Elevations
Sections
Details
Stone schedules
Cutting lists
Pool layouts
Stair drawings
Façade-panel schedules
CAD files
BIM exports
Three-dimensional models
Physical templates

Documents should clearly identify:

Project name
Drawing title
Revision
Units
Scale
Finished dimensions
Surface finish
Edge finish
Product code
Quantity
Installation orientation
Approval status

Revision Control

Every manufacturing document should show:

Revision number
Revision date
Approval status
Issued-for-production status
Changed dimensions
Changed quantities
Superseded references

Late revisions may affect:

Stone already cut
Production
Cost
Packaging
Freight planning
Delivery
Installation sequence

Production should begin only from clearly approved information.

Measurement Systems

DMR Limestone may manufacture from:

Metric dimensions
Imperial dimensions

Projects using both systems should establish one approved production basis.

Documents should clearly identify whether dimensions are:

Exact
Nominal
Metric
Imperial
Including joints
Excluding joints
Converted
Rounded

Approximate conversions should not replace approved production dimensions.

Project Development Process

A typical capability-based project process may include:

Preliminary enquiry
Project-location review
Drawing and quantity review
Material-category recommendation
Sample preparation
Colour-range approval
Surface-finish approval
Technical requirement review
Mock-up production
Drawing coordination
Cutting-list approval
Block and slab selection
Primary cutting
Thickness calibration
Surface finishing
Cut-to-size production
CNC fabrication
Curved cutting
Edge profiling
Fixing preparation
Carving and hand finishing
Dimensional inspection
Dry layout or trial assembly
Piece numbering
Packaging by project area
Pre-shipment inspection
Container or truck loading
Export shipment

What DMR Limestone Requires Before Production

Before manufacturing begins, the project team should provide or approve:

Material selection
Colour range
Surface finish
Product dimensions
Thickness
Edge profiles
Quantities
Drawings
Cutting lists
Tolerances
Fixing preparation
Finished faces
Installation orientation
Piece-numbering system
Packaging sequence
Delivery destination
Required programme

Additional information may be required for:

Façade panels
Curved components
Pools
Staircases
Existing buildings
Restoration-inspired pieces
Structural elements
Complex carving

Why Architects and Contractors Work with DMR Limestone

DMR Limestone combines:

Turkish limestone knowledge
Project-based production
Standard and custom manufacturing
Cut-to-size capability
CNC processing
Skilled stone finishing
Architectural carving
Façade-panel production
Curved stone fabrication
Mock-up support
Dry layout
Piece numbering
Quality control
Installation-area packaging
International shipment preparation

Our capabilities can support projects from individual custom components to coordinated multi-building stone packages.

Frequently Asked Questions About Limestone Manufacturing Capabilities

Is DMR Limestone a limestone manufacturer?

DMR Limestone manufactures standard and custom Turkish limestone products for architectural projects and distribution programmes.

Which limestone products can you manufacture?

Products may include tiles, slabs, pavers, façade panels, pool coping, stairs, window sills, fireplaces, columns, capitals, balustrades, wall caps and custom architectural stone.

Can you manufacture custom dimensions?

Yes. Limestone may be manufactured according to approved metric or imperial dimensions.

Can you produce cut-to-size limestone?

Yes. Standard, large-format, curved, angled and profile-cut pieces may be manufactured.

Can you work from architectural drawings?

Yes. Production may be based on approved drawings, schedules, cutting lists and digital files.

Can you work from DWG and DXF files?

Yes. Coordinated CAD files may support cutting, profiling and CNC production.

Can BIM information be used?

Approved BIM exports and dimensional schedules may support manufacturing coordination.

Can you work from three-dimensional models?

Yes. Three-dimensional models may support curved, carved and complex architectural stone production.

Can you work from physical templates?

Yes. Templates may be used for pools, curves, existing openings and replacement components.

Can you manufacture one custom piece?

Selected one-off components may be reviewed according to material, size, complexity and project feasibility.

Can you manufacture large project quantities?

Yes. Large projects may be organised through phased production, repeated piece codes and project-area packaging.

Can you manufacture several product types for one project?

Yes. A project may combine façade panels, floors, stairs, coping, sills, fireplaces and architectural elements.

Can you manufacture large-format limestone?

Yes. Maximum dimensions depend on the stone, thickness, weight, handling, transport, fixing and application.

Can you manufacture custom thicknesses?

Yes. Available thickness depends on the material, dimensions, application and technical requirements.

Can limestone be CNC machined?

Yes. CNC production may include profiling, drilling, grooving, rebates, engraving and relief carving.

Can limestone be carved?

Yes. Decorative panels, capitals, corbels, signs, logos and architectural details may be carved.

Is carving completed only by CNC machines?

No. Selected pieces may combine CNC machining with hand finishing.

Can Arabic calligraphy be carved?

Yes. Approved Arabic lettering and geometric designs may be engraved or relief carved.

Can company logos be produced?

Yes. Logos may be engraved, recessed, relief carved or prepared for metal-letter installation.

Can curved limestone be manufactured?

Yes. Curved panels, coping, arches, steps, wall caps, benches and other components may be produced.

Can limestone be mitred?

Yes. Mitred coping, stairs, fireplaces, portals, wall caps and furniture components may be manufactured.

Can bullnose edges be produced?

Yes. Full bullnose, half bullnose and custom rounded profiles may be produced.

Can chamfers and bevels be manufactured?

Yes. Chamfers, bevels, pencil edges and other edge treatments may be produced.

Can grooves and rebates be machined?

Yes. Grooves, rebates, drip grooves, fixing slots and drainage channels may be machined.

Can façade fixing slots be prepared?

Yes. Kerfs, anchor slots, dowel holes, undercut holes and bracket recesses may be manufactured from approved details.

Does DMR Limestone design the complete façade system?

No. The complete façade system must be designed and approved by qualified project professionals.

Can you manufacture façade corner pieces?

Yes. Mitred corners, solid corners, return panels and custom corner solutions may be manufactured.

Can you manufacture columns?

Yes. Round, square, smooth, fluted, tapered and segmented columns may be produced.

Can you manufacture capitals?

Yes. Classical, simplified and custom-designed capitals may be manufactured.

Can decorative columns be load bearing?

This depends on the complete structural design. Decorative limestone elements should not automatically be assumed to be structural.

Can you manufacture balustrades?

Yes. Balusters, rails, posts and curved components may be produced.

Does DMR Limestone engineer balustrade systems?

No. Structural performance, guard heights, spacing and fixings must be approved by qualified local professionals.

Can you manufacture arches?

Yes. Semicircular, segmental, pointed, elliptical and custom arches may be produced.

Can keystones be manufactured?

Yes. Standard and carved keystones may be produced according to approved drawings.

Can cornices and mouldings be manufactured?

Yes. Classical, contemporary and custom profiles may be manufactured.

Can you manufacture fireplace surrounds?

Yes. Modern, classical, carved and project-specific fireplace components may be produced.

Can you manufacture limestone staircases?

Yes. Treads, risers, landings, winder steps, curved steps and custom nosings may be manufactured.

Can anti-slip grooves be added to stairs?

Yes. Grooves and insert recesses may be produced according to approved details.

Can window sills be manufactured?

Yes. Sloped, grooved, rebated, returned and curved sills may be manufactured.

Can drip grooves be machined?

Yes. Drip grooves may be produced on sills, wall caps and other suitable products.

Can wall caps be manufactured?

Yes. Flat, sloped, saddleback, curved and bullnose wall caps may be produced.

Can pier caps be manufactured?

Yes. Flat, pyramid, hipped, round and lighting-ready caps may be manufactured.

Can pool coping be manufactured?

Yes. Straight, bullnose, drop-face, rebated, mitred and curved coping may be produced.

Can coping be manufactured from a pool plan?

Yes. Accurate pool drawings can be used to manufacture numbered coping pieces.

Can drop-face coping be manufactured?

Yes. Solid, mitred and bonded drop-face components may be produced.

Can radius corners be manufactured?

Yes. Radius and curved corner pieces may be manufactured from approved geometry.

Which surface finishes are available?

Available finishes may include honed, brushed, sandblasted, tumbled, grooved, fluted and other project-specific textures.

Can custom finishes be developed?

Selected finish combinations may be reviewed using representative samples and mock-ups.

Can you match a finish from a photograph?

A photograph may provide direction, but physical samples are preferable because lighting and image processing may alter appearance.

Can you match an existing stone exactly?

Exact matching cannot be guaranteed because natural stone varies by geological source and production batch.

Can you match an existing profile?

Profiles may be reproduced from accurate drawings, templates, scans or physical samples.

Can you manufacture replacement pieces?

Yes. Replacement components may be manufactured, but later material may not match the original stone exactly.

Can you prepare samples?

Yes. Material, finish, range, profile and mock-up samples may be prepared.

Can colour-range samples be supplied?

Yes. Range samples can help define acceptable natural variation.

Can full-size mock-ups be manufactured?

Yes. Mock-ups may be produced for façades, pools, stairs, floors, walls and custom architectural elements.

Can stone be dry laid before shipment?

Selected flooring, coping, wall, staircase, fireplace and carved products may be dry laid or trial assembled.

Can pieces be numbered?

Yes. Pieces may be numbered according to approved drawings and installation locations.

Can packaging be organised by floor?

Yes. Crates may be organised according to floor, room, elevation or installation sequence.

Can packaging be organised by villa?

Yes. Multi-villa projects may receive villa-specific and type-specific packaging.

Can smaller crates be prepared?

Yes. Maximum crate dimensions and weights should be confirmed before packaging.

Can crates be prepared for crane lifting?

Crates may be coordinated for suitable lifting and unloading arrangements when requirements are provided in advance.

Can slabs be exported?

Yes. Limestone slabs may be supplied on suitable A-frame supports.

Can slabs and cut-to-size pieces be shipped together?

This may be possible depending on weight, packaging, A-frame position and unloading requirements.

Can mixed-product containers be prepared?

Yes. Compatible tiles, pavers, coping, panels and custom pieces may be combined.

Can private-label products be manufactured?

Yes. Product names, buyer codes, labels, barcodes and packaging may be coordinated.

Can local-language labels be prepared?

Buyer-approved product descriptions may be included when agreed before packaging.

Can production photographs be supplied?

Production, dry-layout, packaging and loading photographs may be supplied according to the agreed process.

Can independent inspection be arranged?

Yes. Inspection scope, criteria, timing and costs should be agreed in advance.

Can technical test reports be supplied?

Available technical information depends on the selected limestone and required test methods.

Does one test report apply to every product?

No. Suitability may depend on dimensions, thickness, finish, climate, fixing and installation.

Can limestone be manufactured for exterior use?

Selected limestone may be manufactured for exterior applications after the intended exposure and technical requirements are reviewed.

Is every limestone suitable for every climate?

No. Material suitability depends on climate, saturation, frost, salt, heat, dimensions, installation and maintenance.

Can limestone be manufactured for coastal projects?

Yes. The project team should address salt, corrosion-resistant fixings, drainage and maintenance.

Can limestone be manufactured for cold climates?

Selected limestone may be suitable when freeze–thaw performance, saturation, thickness, drainage and installation are assessed.

Can limestone be manufactured for hot climates?

Selected limestone may be suitable when thermal movement, surface temperature, joints and installation conditions are considered.

Can limestone be manufactured for pool projects?

Yes. Pool coping, pavers, steps and related components may be produced.

Is limestone automatically slip resistant?

No. Slip performance depends on the material, finish, wear, moisture, cleaning, slope and testing.

Does DMR Limestone install limestone?

Installation scope depends on the project and agreed commercial arrangement. Local installation should be completed by experienced natural-stone contractors.

Does DMR Limestone provide structural engineering?

No. Structural, façade, seismic, wind and fire engineering must be completed by qualified project professionals.

Can you coordinate international shipping?

Freight coordination may be provided according to the agreed quotation and commercial terms.

Can products be delivered to a project site?

Delivery possibilities depend on customs clearance, inland transport, access, storage and unloading arrangements.

Who is responsible for unloading?

Unloading responsibility depends on the agreed delivery terms. Suitable equipment should be arranged by the responsible party.

Should spare limestone be ordered?

Yes. Spare material from the original production batch is recommended for custom and long-distance projects.

What information is required for a quotation?

Please provide:

Project name
Project country and city
Product type
Limestone preference
Drawings
Cutting lists
Dimensions
Thickness
Surface finish
Edge profiles
Quantities
Interior or exterior use
Climate exposure
Required tolerances
Packaging requirements
Delivery destination
Required programme

Request Limestone Manufacturing Information and Pricing

Are you sourcing custom limestone for a villa, hotel, resort, commercial façade, interior, swimming pool, landscape or architectural stone project?

Contact DMR Limestone to request:

Turkish limestone samples
Material recommendations
Colour-range samples
Surface-finish samples
Full-size mock-ups
Cut-to-size limestone
CNC limestone fabrication
Curved stone production
Façade panels
Fixing preparation
Interior flooring
Exterior pavers
Pool coping
Stair components
Window sills
Fireplace surrounds
Columns and capitals
Balustrades
Arches and keystones
Cornices and mouldings
Carved architectural stone
Custom signs and logos
Dry layout
Piece numbering
Quality-control coordination
Project-area packaging
Private-label production
Mixed-product shipment planning
Export pricing
International shipment coordination

Send us your drawings, product dimensions, surface finishes, quantities, technical requirements, project location and delivery destination to receive a project-specific limestone manufacturing quotation.